Sirona SIM MODULAR Operating Instructions Manual Download Page 167

Page: 167 / 218

65 64 020 D3650

D3650

201.01.02

02 04.2016

167

Sirona Dental Systems GmbH

5 Care, cleaning and maintenance by the user

Operating Instructions Simulation Unit SIM MODULAR

5.3 Instruments and instrument hoses

båÖäáëÜ

5. Assistant element side: Insert the valve bodies of the SPRAYVIT E

into the adapter in the supply module.



All water-carrying instruments are inserted into the cleaning
adapters.

6. Touch the

Start

key on the touchscreen.



The purging process begins.

IMPORTANT

Pinching the instrument hoses
Be careful not to pinch the instrument hoses when inserting the

instruments.
If the hoses are pinched, the water flow will be obstructed during

purging.
The water flow rate to the instruments is not checked by the simulation

unit.

Start

Summary of Contents for SIM MODULAR



























































































































































































































Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands

Sirona SIM MODULAR, Operating Instructions Manual

Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands