Sirona SIM MODULAR Operating Instructions Manual Download Page 179

Page: 179 / 218

65 64 020 D3650

D3650

201.01.02

02 04.2016

179

Sirona Dental Systems GmbH

5 Care, cleaning and maintenance by the user

Operating Instructions Simulation Unit SIM MODULAR

5.4 Vacuum system

båÖäáëÜ

5.4.5

Empty the central suction sieve.

Emptying the central suction sieve in the Comfort assistant element

1. Open the cover on the suction sieve on the assistant element and

remove it.

2. Collect amalgam from the suction sieve. Amalgam residues must be

disposed of separately.

3. Clean the sieve under running water and put it back into the assistant

element.

5.4.6

Cleaning and disinfecting the suction hoses

The hoses of the spray aspirator and the saliva ejector as well as the

connection hose to the supply module can be pulled off for rinsing under

running water.
The outside of the suction hoses can be disinfected by spraying or wiping.

Assistant element, suction hoses

NOTICE

Powdering suction hoses with talcum
If the surfaces of the hoses have become sticky from disinfectants,

clean them with a commercially available dishwashing liquid and then

powder them with a light coat of talcum if necessary.

Summary of Contents for SIM MODULAR



























































































































































































































Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands

Sirona SIM MODULAR, Operating Instructions Manual

Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands