Sirona SIM MODULAR Operating Instructions Manual Download

Page: 132 / 218

65 64 020 D3650

132

D3650

201.01.02

02 04.2016

4 Operation

Sirona Dental Systems GmbH

4.10 Operation with a PC

Operating Instructions Simulation Unit SIM MODULAR

4.10.1.4

Communication with SIDEXIS

The SIDEXIS PC application enables you e.g. to display X-ray and

intraoral camera images and transmit them to the SIVISION monitor. The

live image of the SiroCam AF / AF+ intraoral camera is displayed in

SIDEXIS and can be saved as a still image in the patient database. The

following SIDEXIS functions can be controlled from the simulation unit to

enable viewing of the stored images on the SIVISION monitor:
See the "SIDEXIS 4" or "SIDEXIS XG" manual for further details.

SIDEXIS control keys

Next image
The next image window is activated.

Tiled layout
All open image windows are scaled to a uniform size in the display area

and arranged without overlapping.
Full frame
The active image window is enlarged so that it covers the entire display

area. The control elements of the SIDEXIS user interface are not

concealed in the process.
Accepting an order
Accepts an order that has been created and is waiting in SIDEXIS.

Readiness for intraoral X-ray exposure
Establishes readiness for an X-ray exposure. A SIDEXIS window then

opens where the image type can be selected and the image can be

described in detail.
Zoom in/out
This magnifies and decreases the active image window and the size of

the image displayed in it on the SIVISION monitor.

Cascaded layout
The opened windows are "cascaded", i.e. arranged slightly displaced

behind one another. All image window titles are thus visible.
Overview layout
The opened image windows are scaled in the display area so that no

scroll bars or as few scroll bars as possible must be displayed. The image

windows are arranged without overlapping.

Summary of Contents for SIM MODULAR



























































































































































































































Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands

Sirona SIM MODULAR, Operating Instructions Manual

Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands