Sirona SIM MODULAR Operating Instructions Manual Download Page 98

Page: 98 / 218

65 64 020 D3650

D3650

201.01.02

02 04.2016

4 Operation

Sirona Dental Systems GmbH

4.6 Assistant element

Operating Instructions Simulation Unit SIM MODULAR

4.6

Assistant element

4.6.1

Maximum load capacity

Comfort assistant element

The maximum load of the assistant element is 1 kg (2.2 lbs). Additionally,

a skid-proof silicone mat can be placed on top of it.

4.6.2

Positioning

Assistant element, collision

4.6.3

Suction handpieces

The assistant element can be equipped with up to two spray aspirators

and one saliva ejector.

Switch off the suction flow using the slide or the 4-way foot switch

Vacuum system, Reference to safety instructions

CAUTION

The assistant element can be positioned above or below the patient

simulator.
The phantom head or the assistant element may become damaged

when moving the patient simulator.
➢ Move the assistant element out of the collision zone before moving

the patient simulator.

CAUTION

The suction handpieces can be closed using the slide. The suction can

be switched off with the 4-way foot switch (option: location selection

valve).
Due to the lack of suction flow, fluid may run back out of the suction

handpieces and into the patient's mouth.
➢ Ensure that the slide is opened and there is suction flow before

holding an aspirator in the phantom head. Return the aspirator to

the holder with the slide open.

➢ Before suction flow can be switched off with the 4-way foot switch,

the spray aspirator and saliva ejector must be removed from the

phantom head.

NOTICE

Suction removal of metal oxides from blasting devices
Observe the safety information on the "Vacuum system".

Summary of Contents for SIM MODULAR



























































































































































































































Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands

Sirona SIM MODULAR, Operating Instructions Manual

Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands