RR Mechatronics STARRSED RS, User Manual

Page: 117 / 259

ESR Error code messages:
0 No errors
1 No cells/plasma found Error No contents could be detected in the pipette.
2 ESR Probably > 140 mm Error Extremely high ESR value.
3 Too many borders found Error More than three borders found, possibly air
bubbles. See Section Troubleshooting Air
bubbles .
4 Column height <nnn> Warning Column height must be between 180 and
210mm. <nnn> = the actual column height.
5 Measure error Warning The down count is not equal to the up count
from the measure head.
6 Bubbles on top Warning Air bubbles on top of the ESR. See Section
Troubleshooting Air bubbles .
7 Limit error Error
One of the following limits are out of the setting
range:
• ESR Time
• Column height
• Dilution
• Bubbles on top
• Hazy aspect
• Temperature
9.2 - Result Printout
The results of the ESR measurements can be send to the printer. The layout of the report depends on the
selection of the 60- or 30 minute method.
Columns:
1. Sample ID=Patient number.
2. Hh=Not corrected 30-minute
ESR result (only in use if 30 minute mode is active).
3. ESR=Not corrected 60-minute ESR result.
4. Tc=60-minute ESR result in millimeters, corrected for 18 °C. (only in use if temperature correction is
active).
5. Aspect (clear, hazy (see page 254)).
6. Pip.=Sedimentation pipette number (number on the pipette belt).
Reporting
MRN-071-2-EN version 7.02 Starrsed RS
117