Ricoh AFICIO AP306, Setup Manual

Page: 371 / 382

Draft 2000/06/22
Message List
97
6
❖
When using rsh, rcp, ftp
At the beginning of the message, the IP address is displayed in parentheses.
Can't build data connection: “mes-
sage” Cannot establish a connection for data trans-
fer due to the displayed error. Check the ftp of
the workstation that requested the print job,
and start it again. When using ftp, this mes-
sage remains only on the system log informa-
tion.
cmd_name:Command not sup-
ported The remote shell command using cmd-name
is not supported. You should use only the
print, stat, status, syslog, info, and prnlog
commands. You should access the printer
only with rsh and rcp remote shell com-
mands.
command line too long The command line is too long.
file_name:No such file or directory You must use a file name with the stat, status,
syslog, info, prnlog, and install commands.
filter data error Some of the data cannot be handled with the
filter option. Confirm the file code and the set-
tings of the filter option.
get log busy Another machine is getting the log informa-
tion. You should get it afterwards.
lost connection The connection was cut by a counterpart.
Check the ftp of the workstation that request-
ed the print job, and start it again. When using
ftp, this message remains only on the system
log information.
no more ftp execute More than three users at a time cannot log in
using ftp. Since there are three other users
that have already logged in, wait until the job
is finished.
print requests full Cannot accept the print request.(max. five
sessions) Confirm the status of the printer
with lpq, rsh, rcp, and ftp commands, and
print it again after the number of print re-
quests (sessions) becomes less than five.
printer busy Cannot get the printer information. Another
user may be accessing it. Wait a few minutes
before trying again.
printer permission denied Cannot get a permission to use the printer.
Confirm the access right with the access con-
trol address and the access control mask.
printer refuse Something is wrong with the printer. Confirm
the status of the printer.