Ricoh AFICIO AP306, Setup Manual

Page: 344 / 382

Draft 2000/06/22
Macintosh Configuration
70
5
Configuring the Printer
Use the operation panel to activate the EtherTalk protocol. (The factory default
is active.)
Reference
For more information about configuration, see the "Setup Guide" that comes
with the printer.
Changing the Printer Name
If the network has several same model printers, the names will be the same.
Printers that have the same name will have their names changed slightly in the
Chooser. For example, three printers named “printer” will appear in the chooser
as “printer0”, “printer1” and “printer2”.
Use applications such as Apple Printer Utility or LaserWriter Utility to change
printer names in the Macintosh EtherTalk environment. These utilities are dis-
tributed by Apple Computer, Inc.
Changing the Zone
It may be necessary to change the zone configuration.
Use applications such as Apple Printer Utility or LaserWriter Utility to change
the zone configuration in the Macintosh EtherTalk environment. These utilities
are distributed by Apple Computer, Inc.
Note
❒
If the Macintosh is configured to use TCP/IP, you can change the zone con-
figuration with a Web Browser.
⇒
P.73 “Configuring the Network Interface
Board with a Web Browser”
Follow these steps to use the Apple Printer Utility.
A Insert the CD-ROM into the CD-ROM drive.
B Copy the “Zone Name.ps” file in the “Zone Name” folder to the hard disk.
C Open the copied “Zone Name ps” file using a text editor, and change “New-
Zone” , which is in the second line from the bottom, to the name of the new
zone.
%!PS-Adobe2.0 %%
Title: Changing Zone (EtherNet only)
%%CreationDate: Tue Dec 16 1997
%%EndComments
true 0 startjob not {ERROR}if
(%EtherTalk%) << /EtherTalkZone (
NewZone ) >> setdevparams
%%EOF
D Save “Zone Name.ps”.