Ricoh AFICIO AP306, Setup Manual

Page: 285 / 382

Draft 2000/06/22
Using Multidirect Print
11
1
E
Select the printer.
TCP/IP
A
Click the printer you want to use, and then click [OK] .
Note
❒
Printers that respond to an IP broadcast from the computer will be dis-
played. To print to a printer not listed here, click
[Specify Address]
and
then type the IP address or host name.
❒
You cannot add an address partially similar to that already used. For ex-
ample, when “192.168.0.2” is already used, “192.168.0.2xx” cannot be
used. Similarly, when “192.168.0.20” is already used, “192.168.0.2” can-
not be used.
NetBEUI
A
Click [NetBEUI] .
A list of printers that can be printed to by the NetBEUI protocol appears.
B
Click the printer you want to use, and then click [OK] .
Note
❒
Printers that respond to an broadcast from the computer will be dis-
played. To print to a printer not listed here, click
[Specify Address] and
then type the NetBEUI address. Confirm the NetBEUI address on the
configuration page. For more information about the printing of config-
uration page, see the "Printer Reference" that comes with the printer.
❒
You cannot print to printers beyond routers.
IPP
A
Click [IPP] .
The IPP setting dialog box appears.
B
In [Printer URL] , type “http://(printer's IP address)/printer” as the IP ad-
dress of the printer.
(Example IP address is 192.168.15.16)
http://192.168.15.16/printer
C
As necessary, type the names to distinguish the printer in
[IPP Port Name]
.
Type a name differing from those of any existing port names.
If you omit this, the address typed in [Printer URL] will be set as the IPP port
name.
D
If using a proxy server and IPP user name, click [Detailed Settings] and
configure the necessary settings.
Note
❒
For more information about these settings, see Multidirect Print Help.