Ricoh AFICIO AP306, Setup Manual

Page: 368 / 382

Draft 2000/06/22
Appendix
94
6
NetWare (When the Network Interface Board is started)
❖
When working as a print server
Access to NetWare server “file server
name” denied. Either there is no account
for this print server on the NetWare
server or the password was incorrect. Cannot log in to the file server. Confirm
that the print server is registered on the
file server. If a password is specified for
the print server, delete it.
Attach to print queue “print queue
name” Attached to the print queue.
File server is empty The file server is not registered. Register
your file server using the utility.
Login to fileserver “file server name”
(“NDS|BINDERY”) Logged in to the file server with NDS or
BINDERY mode.
Open log file “file name” The specified log file has been opened.
Printer “printer name” has no queue The print queue is not assigned to the
printer. Using NWAdmin, assign the
print queue to the printer, and then re-
start it.
Print queue “print queue name” cannot
be serviced by printer 0, “print server
name” Print services are not available for the
print queue. Confirm that the volume of
the print queue exists on the specified
file server.
The print server received error “error
number” during attempt to log in to the
network.Access to the network was de-
nied.Verify that the print server name
and password are correct. Cannot log in to the file server. The print
server is not registered or the password
is specified. Register the print server
without specifying a password.