REXROTH RD 500 Series, Applications Manual

Page: 240 / 276

8-24
Parameter Value Assignment RD 500 RD51
DOK-RD500*RD51*******-IB04-EN-P
Drive setting
Para-
meter
No.: Name Description / explanation
selectable options
Factory setting
min ... max values
Pass-
word
0071 Load factorySetting No action 0
0 = no action
1 = basic, standard values are loaded Parameters,
with a password level less than or the same as
the entered password level are set to the
standard value of the basic parameterization.
2 = free standard values are loaded Parameters
with a password level less than or equal to the
entered password level are set to the standard
value of the free parameterization.
3 = standard values for NAMUR applications are
loaded Parameters, with a password level less
than or the same as the entered password level
are set to the standard value of the basic
parameterization with activated NAMUR
functions.
4 = standard values for Sercos applications are
loaded Parameters, with a password level less
than or the same as the entered password level
are set to the standard value of the free
parameterization for Sercos applications. 0 ... 4
0732 Copy from keypad Caution: Only those parameters are copied which
are enabled as a result of the selected password. No
The data set, saved in the operator panel is copied
into the drive.
0 = no
1 = yes
2 = designation (the saved data set designation
can be viewed here) 0 ... 2
0733 Copy data to
keypad No 0
The complete drive converter data set is copied into
the operator panel.
0 = no
1 = yes
A data set name can be entered after the data
transfer.
You can scroll through the ASCII code using the +
and - keys (the system goes to the start of the
following ranges by simultaneously pressing the +
and - keys: A, a, 0 and the blank symbol).
You can move the cursor to the right or left using the
< or > key. 0 / 1
0064 Parameteriz. level Basic
parameterization: 23
0 = basic parameterization: The operator has
access to the pre-defined parameters of the
basic parameterization, menu-prompted or via
the numerical list.
1 = free parameterization: The operator can
access all of the parameters associated with
the free parameterization.
Caution: Data can be lost when changing the
parameterizing modes! Please carefully read the
Section, 1.3 Working with basic parameterization
and the free parameterization in the Manual,
Function charts and parameter list.
0 / 1