REXROTH RD 500 Series, Applications Manual

Page: 182 / 276

6-8
Electrical Installation of Inverter RD 500 RD51
DOK-RD500*RD51*******-IB04-EN-P
X80 Starting lock-out (only in A1 and A2)
RD51.2-xx-
RD51.3-xx- Type pole number Execution
003 plug-in connection 4 Plug on device
005 plug-in connection 4 Plug on device
007 plug-in connection 4 Plug on device
015 plug-in connection 4 Plug on device
018 plug-in connection 4 Plug on device
Tab. 6-12 Execution
Identification single connection
Identification signification
1
2
During operation, terminals 1 - 2 must be closed; when they are
opened, the start of the connected motor is inhibited.
3
4
Starting lock-out floating acknowledge contact,
30 V DC / 1 A N / C contact
Tab. 6-13 Identification single connection
RD51.2-xx-
RD51.3-xx- Recommended
minimum cross-
section, mm² AWG Cable cross-
section which can be
connected, mm² AWG
003 1 18 0.08 – 1.5 28 - 16
005 1 18 0.08 – 1.5 28 - 16
007 1 18 0.08 – 1.5 28 - 16
015 1 18 0.08 – 1.5 28 - 16
018 1 18 0.08 – 1.5 28 - 16
Tab. 6-14 Connection cross-section
0.22 – 0.25 Nm
Execution
Connection cross-section
Torque