REXROTH RD 500 Series, Applications Manual

Page: 159 / 276

RD 500 RD51 Inverter Technical Data
5-19
DOK-RD500*RD51*******-IB04-EN-P
•
When the drive units are mounted in a cabinet, the cooling air
requirement of the units must be calculated (refer to Technical data
5.1 to 5.5) and the cabinet ventilation appropriately dimensioned.
•
The fastening screws are shown in the drilling templates of the
dimension drawings.
Dimension Drawing, Size Classes A - B
Size classes
ESC
START STOP
MON ENTER PROG
-
+
1
ESC
START STOP
MON ENTER PROG
-
+
1
A B
90 135
440 410 380
M6 M6
0 2 4 0 3 6
drilling templates
Grid pattern 22,5mm
MB510001EN01.FH9
Dimension in mm
High Voltage. Dangerof
electrical shock. Donot
touch electrical connec-
tions for 5 minutes
after switching power off.
Readand follow
"Safety Instructions for
Electrical Drives” manual,
DOK-GENERL-DRIVE
******-SVS...
before operating
DANGER
High Voltage. Dangerof
electrical shock. Donot
touch electrical connec-
tions for 5 minutes
after switching power off.
Readand follow
"Safety Instructions for
Electrical Drives” manual,
DOK-GENERL-DRIVE
******-SVS...
before operating
DANGER
Fig.: 5-8 Dimension sheet, size classes A - B
Dimension Drawings for Cooling Types L and P for Size Classes A - B
Devices with forced air-cooling, sizes A and B to E have different depths.
Clearance brackets are available for size A drive converters. These allow
the depth to be compensated when mounted with other inverters having
different sizes. Refer to Fig.: 5-9.