REXROTH RD 500 Series, Applications Manual

Page: 220 / 276

8-4
Parameter Value Assignment RD 500 RD51
DOK-RD500*RD51*******-IB04-EN-P
8.2 Password Levels
The parameters are located at various access levels. A password is
required to change parameters. If several parameters are changed in the
parameterization, the password has to be entered only the first time. The
required password level can be taken from the parameter table.
Password not required
Esc
,
Mon
,
Prog
and acknowledge with
Enter
Esc
,
Mon
,
Prog
, and acknowledge with
Enter
,
Esc
,
Mon
,
Prog
and acknowledge with
Enter
.
All of the parameters of the lower password levels are also accessible
with the selected password.
Note: Please , change the higher password level only through
trained and qualified user. Wrong Parameterization from
Parameter level 2, especially Parameter level 3 may be the
cause of defects on the connected motor. (example:
Overloading by wrong current limit, Selection wrong motor
type, Selection wrong motor temperature sensor ).
8.3 Quick Setup
Para-
meter
No.: Name Description / explanation
selectable options
Factory setting
min ... max values
Pass-
word
0010 Language German 0
Selects the display language:
0 = German
1 = English
0 / 1
0100.00 Motor type Induction motor
ASM 2
Selects the motor type:
0 = Induction motor ASM
1 = Synchronous motor SM
0 / 1
0101.00 Rated speed ASM
1)
2
Rated speed from the motor rating plate.
2)
100 ... 210000 RPM
0102.00 Rated frequency
ASM 1) 2
Rated frequency from the motor rating plate.
2) 5.0 Hz... 3500 Hz
0103.00 Rated current ASM 1) 2
Rated current from the motor rating plate.
2) 0.5 A... P0033
0104.00 Rated voltage ASM 1) 2
Rated voltage from the motor rating plate.
2) 0.50 ... 600 V
Password 0
Password 1
Password 2
Password 3