Raymarine E90W User Reference Handbook Download Page 98

Page: 98 / 250

Menu item

Description

Options

Caution & Routing Data

Determines whether caution and routing data is displayed or not.

•

OFF

— caution and routing data is NOT displayed.

•

— caution and routing data is displayed.

• OFF

• ON (default)

Marine Features

When this menu item is set to ON, the following water-based
cartographic features are displayed:

• Cables.

• Nature of seabed points.

• Tide stations.

• Current stations.

• Port information.

• OFF

• ON (default)

Land Features

When this menu item is set to ON, land-based cartographic features
are displayed.

• OFF

• ON (default)

Deep Water Color

Determines the color used to shade areas of deep water. (The depth
used to determine areas of deep water is specified by the

Safety

Contour

setting)

• White (default)

• Blue

Business Services

When this menu item is set to ON, symbols indicating the location of
a business will be shown.

• OFF

• ON (default)

Panoramic Photos

Determines whether panoramic photos are available for landmarks
such as ports and marinas.

• OFF (default)

• ON

Roads

Determines whether major coastal roads are displayed on the chart:

•

OFF

— coastal roads are NOT displayed.

•

— coastal roads are displayed.

• OFF

• ON (default)

E-Series Widescreen User reference

Summary of Contents for E90W



























































































































































































































































Search results

Summary of Contents for E90W

Reviews:

Related manuals for E90W

Brands by name

Popular brands

Raymarine E90W, User Reference Handbook

Search results

Summary of Contents for E90W

Reviews:

Related manuals for E90W

Brands by name

Popular brands