Note
Product operation guide and download info, please find the Download Index
file stored in the memory of BL-818GT and you can read or install accordingly
under internet connection.
Note
Do not stick anything on back cover.
Risk of explosion if Battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions.
G-Sensor button:
Press & hold 1 second to calibrate G-sensor.
Charging the BL-818GT
BL-818GT Function buttons
Acquiring Satellite Signal
Update firmware
Please make sure you have everything included in the package.
Please FULLY charge the BL-818GT for the first time use by
c nnectin the supp ied icr
cab e thr u h c mputer r car’s
cigarette adaptor.
Power button: Press and hold to power on/off.
Download and extract the firmware from Qstarz web site
http://racing.qstarz.com/Products/BL-818GT-FirmwareUpdate.html. If you
need to update the Bootloader, please also download the latest Bootloader
file.
➁
Power off BL-818GT and connect with computer via Micro USB cable.
➂
Copy the firmware file “FW.qst” and Boodloader file “BL.qst” to the root
directory of BL-818GT Micro SD card.
➃
After copying, please select Safely Remove Hardware and Eject Media
(QSTARZ BL-818GT) in Windows operating system.
➄
Unplug the Micro USB cable, and firmware update will begin automatically.
LEDs will flash in sequence during the update process.
➅
Once firmware update is completed, the device will turn off automatically.
Do not shut down or power off during the update process.
Remove the back cover by pushing the battery cover release tab
with your thumbnail.
➁
Insert the battery, and align the battery contacts with the terminals
in the battery compartment.
➂
Place the back cover over the battery compartment, and press it
downward until it clicks into place.
Note
The failure of the firmware update will cause the device irreparable damage.
Before update the latest firmware, please make sure that the battery capacity
is over 50% and the back cover is installed.
●
Hold on Power button to power on BL-818GT.
●
Place the device outside under clear view of sky to acquire
GPS signals.
●
Acquiring GPS signals may take few minutes. The GPS LED is
turning to solid green when it has connected with GPS
satellites.
Device Charging and Updating firmware.
Shut down the device. (Inside the rubber cover)
BL-818GT unit
Low Power
Recharging
Device power off
GPS position is fixed
Searching for device
Bluetooth connected
GPS is not connected with satellite
1. Fully charged.
2. Device power off
1. Searching for GPS satellite signal
2. Device power off
1. GPS position is fixed
2. Device power off
Note
Before exporting the data to computer please turn off the power.
GNSS Support
