Raymarine E90W User Reference Handbook Download Page 162

Page: 162 / 250

2. Press the

GOTO WAYPOINT OPTIONS

softkey.

The Waypoint List is displayed.

3. Using the trackpad, select the waypoint that you want to go to.
4. Press the

GOTO WAYPOINT

softkey.

Note:

Press the

STOP GOTO

softkey at any time to stop going

towards the waypoint.

Note:

If you have sailed off course while heading to a waypoint,

you can press the

RESTART XTE

button at any time to restart

Cross Track Error.

Changing the data displayed in the CDI
application

In the CDI application:

1. Press the

MENU

button.

2. Select the

Panel Setup Menu

menu item.

3. Select the

Configure: CDI

menu item.

A red outline appears around the main screen element in the
CDI display.

4. Highlight the data element that you want to change.
5. Select the

SELECT DATA

softkey.

6. Select the appropriate data group.
7. Highlight the data item that you want, then select the appropriate

option.

8. Press the

button.

The CDI display will be updated to show the data that you specified.

162

E-Series Widescreen User reference

Summary of Contents for E90W



























































































































































































































































Search results

Summary of Contents for E90W

Reviews:

Related manuals for E90W

Brands by name

Popular brands

Raymarine E90W, User Reference Handbook

Search results

Summary of Contents for E90W

Reviews:

Related manuals for E90W

Brands by name

Popular brands