Raymarine E90W User Reference Handbook Download Page 87

Page: 87 / 250

intensity of the overlay to achieve optimal visibility of both chart
and weather information.

Note:

The NOWRad weather overlay can only be used in North

America and its coastal waters.

Enabling NOWRad weather overlay on the chart

In the 2D chart view:

1. Select the

2D CHART LAYERS

softkey.

2. Select the ON option using the

NOWRAD OVERLAY

softkey.

Choosing weather reports for display on the chart

In the 2D chart view:

1. Select the

2D CHART LAYERS

softkey.

2. Select the

WEATHER REPORTS

softkey.

3. Use the

TROPICAL STATEMENTS

MARINE WARNINGS

MARINE ZONE FORECASTS

, or

WATCHBOX WARNINGS

softkeys to select the required weather reports.

Using the chart

Summary of Contents for E90W



























































































































































































































































Search results

Summary of Contents for E90W

Reviews:

Related manuals for E90W

Brands by name

Popular brands

Raymarine E90W, User Reference Handbook

Search results

Summary of Contents for E90W

Reviews:

Related manuals for E90W

Brands by name

Popular brands