Raymarine E90W User Reference Handbook Download Page 130

Page: 130 / 250

Adjusting digital radar color gain

In the radar application:

1. Select the

GAIN

softkey.

2. Select the

BUOY MODE

HARBOR MODE

COASTAL MODE

OFFSHORE MODE

, or

BIRD MODE

softkey, as appropriate.

3. Select the same softkey again.

The softkeys change to provide more options.

4. Use the

COLOR GAIN

softkey to select the MAN option.

5. Using the rotary controller, adjust the gain control to the

appropriate setting (between 0 and 100%).

6. Press the

button.

Adjusting digital radar rain clutter

In the radar application:

1. Select the

GAIN

softkey.

2. Select the

BUOY MODE

HARBOR MODE

COASTAL MODE

OFFSHORE MODE

, or

BIRD MODE

softkey, as appropriate.

3. Select the same softkey again.

The softkeys change to provide more options.

4. Use the

RAIN

softkey to select the ON option.

5. Using the rotary controller, adjust the gain control to the

appropriate setting (between 0 and 100%).

6. Press the

button.

Adjusting digital radar sea gain

In the radar application:

1. Select the

GAIN

softkey.

2. Select the

BUOY MODE

HARBOR MODE

COASTAL MODE

OFFSHORE MODE

, or

BIRD MODE

softkey, as appropriate.

3. Select the same softkey again.

The softkeys change to provide more options.

4. Use the

SEA

softkey to select the MAN option.

5. Using the rotary controller, adjust the gain control to the

appropriate setting (between 0 and 100%).

6. Press the

button.

Adjusting SuperHD radar antenna boost

In the radar application:

1. Select the

GAIN

softkey.

2. Select the

BUOY MODE

HARBOR MODE

COASTAL MODE

OFFSHORE MODE

, or

BIRD MODE

softkey, as appropriate.

3. Select the same softkey again.

The softkeys change to provide more options.

4. Select the

SUPER HD CONTROLS

softkey.

5. Use the

ANTENNA BOOST

softkey to select the MAN option.

6. Using the rotary controller, adjust the gain control to the

appropriate setting (between 0 and 100%).

7. Press the

button.

Adjusting SuperHD radar power boost

In the radar application:

1. Select the

GAIN

softkey.

2. Select the

BUOY MODE

HARBOR MODE

COASTAL MODE

OFFSHORE MODE

, or

BIRD MODE

softkey, as appropriate.

3. Select the same softkey again.

The softkeys change to provide more options.

4. Select the

SUPER HD CONTROLS

softkey.

5. Use the

POWER BOOST

softkey to select the MAN option.

130

E-Series Widescreen User reference

Summary of Contents for E90W



























































































































































































































































Search results

Summary of Contents for E90W

Reviews:

Related manuals for E90W

Brands by name

Popular brands

Raymarine E90W, User Reference Handbook

Search results

Summary of Contents for E90W

Reviews:

Related manuals for E90W

Brands by name

Popular brands