manualshive.com logo in svg

R&S FSW Series, User Manual

The Rohde & Schwarz FSW Series is an advanced spectrum analyzer designed for precise measurement and analysis. Our user-friendly "Getting Started" manual provides step-by-step instructions to ensure a smooth setup and operation. Download your free copy from manualshive.com to maximize the potential of this exceptional product.

Share
Download
background image

Index

R&S

®

FSW

1424

User Manual 1173.9411.02 ─ 43

Measurement (remote control) ................................. 967
Measurement example ............................................. 305
Performing ........................................................ 297, 303
Results ...................................................................... 294
Results (remote control) ........................................... 968
Scaling (remote control) ............................................971
see also Statistics ..................................................... 293
Using gate ranges .....................................................303

Application cards ............................................................... 22
Application notes ............................................................... 22
Applications

1xEV-DO BTS ........................................................... 118
1xEV-DO MS ............................................................. 118
3G FDD BTS ............................................................. 118
3G FDD UE ............................................................... 118
5G NR ....................................................................... 118
802.11ad ................................................................... 119
Amplifier Measurement ............................................. 119
Analog Demodulation ................................................ 119
Available ....................................................................116
cdma2000 BTS ......................................................... 119
cdma2000 MS ...........................................................120
DOCSIS 3.1 .............................................................. 123
Group Delay ..............................................................120
GSM ..........................................................................120
I/Q Analyzer .............................................................. 120
LTE ............................................................................120
NB-IoT ...................................................................... 120
Noise Figure ............................................................. 121
OneWeb .................................................................... 121
Phase Noise ............................................................. 121
Pulse ......................................................................... 121
Real-Time Spectrum ................................................. 121
Setting .......................................................................124
Signal and Spectrum Analyzer mode ........................ 115
Spectrum ................................................................... 117
Spurious Measurements ........................................... 122
TD-SCDMA BTS ....................................................... 122
TD-SCDMA UE ......................................................... 122
Transient Analysis .....................................................122
Vector Signal Analysis (VSA) ....................................123
WLAN ....................................................................... 123

APR (channel bar) .............................................................86
APX

External generator ............................................ 387, 392

Arranging

Windows ........................................................... 108, 507

Arrow keys ........................................................................ 53
ASCII trace export ........................................................... 615
Att (channel setting) .......................................................... 85
Attenuation ...................................................................... 454

Auto .......................................................................... 454
Electronic .................................................................. 454
Impact ....................................................................... 450
Manual ...................................................................... 454
Option ....................................................................... 454
Protective (remote) ................................................. 1068

Audio demodulation

Volume (remote control) .......................................... 1121

Audio output

Configuring ............................................................... 553
Marker demodulation  ............................................... 545

Audio Output

Programming example ............................................1207

Audio signals

Output (remote) ............................................... 437, 1119

Auto adjustment

Triggered measurement ..........................................1066

Auto all ............................................................................ 498
Auto frequency ................................................................ 498
Auto ID

External Mixer ................................................... 414, 424
External Mixer (remote) .......................................... 1076
Threshold (External Mixer, remote control) ............. 1077
Threshold (External Mixer) ....................................... 424

Auto level

Hysteresis ......................................................... 499, 500
Reference level ................................................. 454, 499
Softkey .............................................................. 454, 499

Auto Peak detector ..........................................................575
Auto peak search ............................................................ 340
Auto scaling .....................................................................458
Auto settings

Meastime Auto .......................................................... 499
Meastime Manual ..................................................... 499

Automatic coupling

Frequencies, external generator ....................... 390, 397

Automatic login mechanism

Activating/Deactivating ............................................. 806

AUX control

TTL synchronization, external generator .................. 383

AUX PORT

Connector ................................................................... 61

AV (trace information) ........................................................88
Average count ................................................. 464, 470, 585

Power sensor ............................................................ 378

Average detector ............................................................. 575

EMI ........................................................................... 335

Average mode

Traces ....................................................................... 585

Averaging

Continuous sweep .................................................... 580
Single sweep ............................................................ 580
Sweep count ............................................................. 580
Traces ....................................................................... 581
Traces (algorithm) ..................................................... 580
Traces (remote control) ........................................... 1129

B

B2000/B5000

External mixers ......................................................... 413

Band

Conversion loss table ............................................... 428
External Mixer ........................................................... 421
External Mixer (remote) .......................................... 1078

Band power markers

Programming example ............................................1205

Band power measurement

Activating/Deactivating ............................................. 544
Deactivating .............................................................. 545
Power mode ..............................................................545
Span ......................................................................... 545

Band power measurement (remote control) .................. 1188
Bandwidth

Configuration (Softkey) ............................................. 465
Coupling ....................................................................461
CP/ACLR .................................................................. 174
Default settings ......................................................... 459
MSR sub blocks ........................................................ 184
MSR, adjacent channels ........................................... 187
MSR, gap channels .................................................. 192
MSR, Tx channel ...................................................... 185

Summary of Contents for FSW Series











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for FSW Series

Medeli SP40A User Manual preview
SP40A
Brand: Medeli Pages: 14
M3S Triton Description Handbook preview
Triton
Brand: M3S Pages: 40
D-tect Systems rad-DX Installation And Operating Instructions Manual preview
rad-DX
Brand: D-tect Systems Pages: 19
E Instruments E500 Quick Manual preview
E500
Brand: E Instruments Pages: 2
JAMAR Technologies RAC Plus I Quick Start preview
RAC Plus I
Brand: JAMAR Technologies Pages: 4
Jamar RAC Geo II User Manual preview
RAC Geo II
Brand: Jamar Pages: 60
Laserworld GREEN-3000 Manual preview
GREEN-3000
Brand: Laserworld Pages: 4
Laserworld GREEN-12000 Manual preview
GREEN-12000
Brand: Laserworld Pages: 4
Laserworld GREEN-150E Manual preview
GREEN-150E
Brand: Laserworld Pages: 4
LaserLiner SensoLite 120 Quick Start Manual preview
SensoLite 120
Brand: LaserLiner Pages: 56
Lasermet ICS-6 Wiring Manual preview
ICS-6
Brand: Lasermet Pages: 8
Make Noise PHONOGENE Owner'S Manual preview
PHONOGENE
Brand: Make Noise Pages: 15
Major tech MT785 Instruction Manual preview
MT785
Brand: Major tech Pages: 40
X-Rite RM200QC User Manual preview
RM200QC
Brand: X-Rite Pages: 45
X-Rite i1Pro Quick Start Manual preview
i1Pro
Brand: X-Rite Pages: 22
Velleman DCM120 User Manual preview
DCM120
Brand: Velleman Pages: 96
i-PRO WJ-NU301K Series Installation Manual preview
WJ-NU301K Series
Brand: i-PRO Pages: 24
i-PRO WJ-NU101K Series Important Information Manual preview
WJ-NU101K Series
Brand: i-PRO Pages: 18

Brands by name

Popular brands

Load more brands