R&S FSW Series, User Manual

Page: 178 / 1450

Measurements and Results
R&S
®
FSW
178 User Manual 1173.9411.02 ─ 43
Standard ......................................................................................................................178
└ Predefined Standards ................................................................................... 179
└ User Standards ............................................................................................. 179
Number of Sub Blocks ................................................................................................ 180
Reference Channel ..................................................................................................... 180
Noise Cancellation ...................................................................................................... 180
Selected Trace ............................................................................................................ 181
Absolute and Relative Values (ACLR Mode) .............................................................. 181
Channel power level and density (Power Unit) ........................................................... 181
Power Mode ................................................................................................................ 182
Optimized Settings (Adjust Settings) ...........................................................................182
Symmetrical Adjacent Setup ....................................................................................... 182
Limit Checking .............................................................................................................182
Standard
The main measurement settings can be stored as a standard file. When such a stan-
dard is loaded, the required channel and general measurement settings are automati-
cally set on the R&S
FSW. However, the settings can be changed. Predefined stand-
ards are available for standard measurements, but standard files with user-defined
configurations can also be created.
Note: If the "Multi-Standard Radio" standard is selected, the "ACLR Setup" dialog box
is replaced by the "MSR ACLR Setup" dialog box (see Chapter 7.2.5, "MSR ACLR
Configuration" , on page 177).
If any other predefined standard (or "NONE") is selected, the "ACLR Setup" dialog box
is restored (see
Chapter 7.2.4, "Channel Power Configuration" , on page 168).
Note that changes in the configuration are not stored when the dialog boxes are
exchanged.
Channel Power and Adjacent-Channel Power (ACLR) Measurement