R&S FSW Series, User Manual

Page: 833 / 1450

Remote Commands
R&S
®
FSW
833 User Manual 1173.9411.02 ─ 43
//Switch into first IQ channel to get results
INST:SEL 'IQ 1';*WAI
CALCulate:MARKer:MAXimum
CALC:MARK:Y?
//Change sweep time in IQ
SENS:SWE:TIME 300us
//Switch to single Sequencer mode
INITiate:SEQuencer:MODE SINGle
//Sweep all channels once, taking the sweep count in each channel into account
INITiate:SEQuencer:IMMediate;*OPC?
//Set marker to maximum in IQ1 and query result
CALCulate:MARKer:MAXimum
CALC:MARK:Y?
//Switch to second IQ channel and retrieve results
INST:SEL 'IQ 2';*WAI
CALCulate:MARKer:MIN
CALC:MARK:Y?
//Switch to first Spectrum channel
INST:SEL 'Spectrum';*WAI
//Query one of the SEM results
CALCulate:MARKer:FUNCtion:POWer:RESult? CPOWer
//Switch to second Spectrum channel
INST:SEL 'Spectrum 2';*WAI
//Query channel power result
CALCulate:MARKer:FUNCtion:POWer:RESult? ACPower
14.5 Configuring and Performing Measurements
The following commands are required to configure measurements in a remote environ-
ment. The tasks for manual operation are described in
Chapter 7, "Measurements and
Results" , on page 131.
● Performing Measurements ....................................................................................834
● Configuring Power Measurements ........................................................................837
● Measuring the Channel Power and ACLR ............................................................ 841
● Measuring the Carrier-to-Noise Ratio ................................................................... 899
● Measuring the Occupied Bandwidth ..................................................................... 900
● Remote Commands for Noise Power Ratio (NPR) Measurements ...................... 902
● Measuring the Spectrum Emission Mask ..............................................................917
● Measuring Spurious Emissions .............................................................................953
● Analyzing Statistics (APD, CCDF) ........................................................................ 967
● Measuring the Time Domain Power ......................................................................977
● Measuring the Harmonic Distortion .......................................................................987
● Measuring the Third Order Intercept Point ............................................................990
● Measuring the AM Modulation Depth ....................................................................993
● Remote Commands for EMI Measurements .........................................................995
● List Evaluations ...................................................................................................1004
● Measuring the Pulse Power ................................................................................ 1008
Configuring and Performing Measurements