Getting Started
R&S
®
FSW
37
User Manual 1173.9411.02 ─ 43
5. If necessary, change the screen resolution to be used. Consider the information in
the note above.
6. Select the instrument to be used for display:
● "Display 1": internal monitor only
● "Display 2": external monitor only
● "Duplicate": both internal and external monitor
7. Tap "Apply" to try out the settings before they are accepted permanently, then you
can easily return to the previous settings, if necessary.
8. Select "OK" if the settings are suitable.
5.1.5
Setting Up a Network (LAN) Connection
A LAN connection is the prerequisite for all network operations. The LAN connection
settings can be configured directly in the Windows operating system.
The R&S
FSW is equipped with a network interface and can be connected to an Ether-
net LAN (local area network). Provided the network administrator has assigned you the
appropriate rights and adapted the Windows firewall configuration, you can use the
interface, for example:
●
To transfer data between a controlling device and the test device, e.g. to run a
remote control program.
See chapter "Remote Control".
●
To access or control the measurement from a remote computer using the "Remote
Desktop" application (or a similar tool)
●
To connect external network devices (e.g. printers)
●
To transfer data from a remote computer and back, e.g. using network folders
This section describes how to configure the LAN interface. It includes the following top-
ics:
Preparing for Use
