R&S FSW Series, User Manual, Page: 615 / 1450

Common Analysis and Display Functions
R&S
®
FSW
615 User Manual 1173.9411.02 ─ 43
3. Optionally, select the "Include Instrument & Measurement Settings" option to insert
additional information in the export file header.
4. Select the "Export Trace to ASCII File" button.
5. In the file selection dialog box, select the storage location and file name for the
export file.
6. If necessary, change the decimal separator to be used for the ASCII export file.
7. Select the data format of the ASCII file.
8. Select "Save" to close the dialog box and export the data to the file.
9.6.5 How to Export a Peak List
You can save the results of a marker peak list to an ASCII file.
1. Press the [MKR FUNCT] key.
2. Select the "Marker Peak List" softkey.
3. Configure the peak search and list settings as described in Chapter 9.3.4.8,
"Marker Peak List" , on page 548.
4. Set the marker peak list "State" to "On".
5. Press the [RUN SINGLE] key to perform a single sweep measurement and create
a marker peak list.
6. Select the "Marker Peak List" softkey to display the "Marker Peak List" dialog box
again.
7. If necessary, change the decimal separator to be used for the ASCII export file.
8. Select the "Export Peak List" button.
9. In the file selection dialog box, select the storage location and file name for the
export file.
10. Select "Save" to close the dialog box and export the peak list data to the file.
9.6.6 Reference: ASCII File Export Format
Trace data can be exported to a file in ASCII format for further evaluation in other appli-
cations. This reference describes in detail the format of the export files for result data.
(For details see Chapter 9.6.4, "How to Export Trace Data and Numerical Results" ,
on page 614)
Importing and Exporting Measurement Results for Evaluation