R&S FSMR, Operating Manual

Page: 580 / 955

CALCulate Subsystem R&S FSMR
1313.9723.12 6.1-44 E-1
CALCulate<1|2>:MARKer<1 to 4>:MINimum:NEXT
This command positions the marker to the next higher minimum value of the corresponding trace in
the selected measurement window.
If no next higher minimum value is found on the trace (level spacing to adjacent values < peak
excursion), an execution error (error code: -200) is produced.
Example: "
CALC:MARK2:MIN:NEXT"
'Positions marker 2 in screen A to the next
'higher maximum value.
Characteristics: *RST value: -
SCPI: device-specific
This command is an event and therefore has no *RST value and no query.
CALCulate<1|2>:MARKer<1 to 4>:MINimum[:PEAK]
This command positions the marker to the current minimum value of the corresponding trace in the
selected measurement window. The corresponding marker is activated first or switched to marker
mode, if necessary.
If no minimum value is found on the trace (level spacing to adjacent values < peak excursion), an
execution error (error code: -200) is produced.
Example: "
CALC:MARK2:MIN"
'Positions marker 2 in screen A to the minimum value of
'the trace.
Characteristics: *RST value: -
SCPI: device-specific
This command is an event and therefore has no *RST value and no query.
CALCulate<1|2>:MARKer<1 to 4>:MINimum:RIGHt
This command positions the marker to the next higher minimum value to the right of the current value
(i.e. in ascending X direction) on the corresponding trace in the selected measurement window.
If no next higher minimum value is found on the trace (level spacing to adjacent values < peak
excursion), an execution error (error code: -200) is produced.
Example: "
CALC:MARK2:MIN:RIGH"
'Positions marker 2 in screen A to the next
'higher minimum value to the right of the
'current value.
Characteristics: *RST value: -
SCPI: device-specific
This command is an event and therefore has no *RST value and no query.
CALCulate<1|2>:MARKer<1 to 4>:PEXCursion <numeric_value>
This command defines the peak excursion. , i.e. the spacing below a trace maximum which must be
attained before a new maximum is recognized, or the spacing above a trace minimum which must be
attained before a new minimum is recognized. The set value is valid for all markers and delta
markers. The unit depends on the selected operating mode.
Example: "
CALC:MARK:PEXC 10dB"
'Defines peak excursion 10 dB in
'SPECTRUM mode
"
CALC:MARK:PEXC 100 HZ"
Defines peak excursion 100 Hz in
'FM DEMOD mode
Characteristics: *RST value: 6dB
SCPI: device-specific
The numeric suffix in MARKer<1 to 4> is irrelevant.