R&S FSMR, Operating Manual

Page: 665 / 955

R&S FSMR MMEMory - Subsystem
1313.9723.12 6.1-129 E-1
MMEMory:SELect[:ITEM]:NONE
This command deletes all data subsets from the list of device settings to be stored/loaded.
Example: "
MMEM:SEL:NONE"
Characteristics: *RST value: --
SCPI: device-specific
This command is an event and therefore has no *RST value.
MMEMory:SELect[:ITEM]:SCData ON | OFF
This command adds the tracking generator calibration data to the list of device settings to be stored/loaded.
Example: "
MMEM:SEL:SCD ON
" 'Inserts the tracking generator correction data
'in the list of data subsets
Characteristics: *RST value: OFF
SCPI: device-specific
MMEMory:SELect[:ITEM]:TRACe[:ACTive] ON | OFF
This command adds the active traces to the list of data subsets of a save/recall device setting.
Active traces are all traces whose state is not blank.
Example: "
MMEM:SEL:TRAC ON"
Characteristics: *RST value: OFF, i.e. no traces will be stored
SCPI: device-specific
MMEMory:SELect[:ITEM]:TRANsducer:ALL ON | OFF
This command includes all transducer factors and sets in the list of data subsets of a device setting
to be stored/loaded.
Example: "
MMEM:SEL:TRAN:ALL ON
"
Characteristics: *RST value: ON
SCPI: device-specific
This command is available from firmware version 1.40 or higher.
This command is an event and therefore has no *RST value.
MMEMory:STORe<1|2>:MARKer
<file_name>
This command saves the data of active markers to a file < file_name >.
Example:
":MMEM:STOR:MARK
'Generates a MARKER.TXT file that contains all data of the active markers in
screen A.
If in screen A two markers are active, the gemerated
MARKER.TXT file
includes the following:
Marker;1;T1
-25.87;dBm
19.920000000;GHz
Delta;2;T1
-21.90;dB
-5.920000000;GHz
Characteristics: *RST-Wert: -
SCPI: device-specific
This command is an event and therefore has no *RST value and no query.