manualshive.com logo in svg

R&S FSMR, Operating Manual

The Rohde & Schwarz FSMR is an advanced measurement receiver offering high-performance signal analysis capabilities. To ensure a seamless experience, we provide a comprehensive user manual that can be easily accessed and downloaded for free from our website manualshive.com. Explore the manual today to unlock the full potential of this exceptional product.

Share
Download
background image

R&S FSMR 

Index 

1166.3363.12 

10.7 

E-3 

EXT METER ON/OFF............................4.4-15, 6.1-185 
EXT SRC ON/OFF ................................. 4.23-12, 6.1-206 
EXTERN ..................................4.10-2, 6.1-197, 6.1-240 
FAST ACP ON/OFF ...............................4.16-11, 6.1-192 
FILE MANAGER ..................................4.20-11, 6.1-125 
FILTER ....................................................4.4-22, 4.4-31 
FILTER TYPE ..........................................4.8-7, 6.1-156 
FIRMWARE UPDATE..........................4.19-26, 6.1-222 
FM ....................4.4-19, 4.14-10, 6.1-17, 6.1-49, 6.1-240 
FREE RUN ............................................4.10-1, 6.1-240 
FREQUENCY LINE 1/2......................................4.17-12 
FREQUENCY OFFSET ............4.5-4, 4.22-15, 4.23-11, 

..........................................................................6.1-169 

FREQUENCY SPAN..............................4.4-45, 6.1-151 
FREQUENCY SWEEP............ 4.23-15, 6.1-204, 6.1-205 
FULL SCREEN ......................................4.18-2, 6.1-103 
FULL SIZE DIAGRAM........................................4.16-12 
FULL SPAN ...................4.4-45, 4.6-1, 6.1-151, 6.1-170 
GATE DELAY ........................................4.10-6, 6.1-196 
GATE LENGTH......................................4.10-6, 6.1-196 
GATE MODE LEVEL/EDGE ..................4.10-5, 6.1-197 
GATE SETTINGS ..................................4.10-5, 6.1-196 
GATED TRIGGER ...................4.10-4, 6.1-196, 6.1-197 
GEN REF INT/EXT ............................................4.23-17 
GENERAL SETUP.............................................4.19-10 
GOTO POINT # ...............4.4-14, 4.4-17, 6.4-37, 6.4-38 
GPIB ..................................................................4.19-10 
GPIB ADDRESS .....................................4.4-15, 6.1-216 
GPIB LANGUAGE .............................................4.19-11 
GRID ABS/REL........................................4.7-4, 6.1-106 
HARDWARE INFO ......................4.19-20, 6.1-6, 6.1-98 
HARM MEAS ON/OFF.......................................4.16-49 
HARMONICS .....................................................4.16-49 
HARMONICS RBW AUTO...................................6.1-66 
HIGHPASS 300 HZ....................4.4-23, 4.4-31, 6.1-167 
HIGHPASS 50 HZ......................4.4-23, 4.4-31, 6.1-167 
HOR SYNC............................................4.10-8, 6.1-240 
ID STRING FACTORY.......................................4.19-10 
ID STRING USER..............................................4.19-10 
IF BW AUTO........................................................4.4-41 
IF BW MANUAL.....................................4.4-41, 6.1-155 
IF GAIN..............................................................4.19-12 
IF POWER ................. 4.10-2, 6.1-197, 6.1-239, 6.1-240 
INP LEVEL 4V/400mV ...........................4.4-30, 6.1-200 
INPUT CAL .................. 4.19-23, 4.19-24, 6.1-98, 6.1-99 
INPUT IMP 50

N

/1M

N

................ 4.4-30, 6.1-17, 6.1-120 

INPUT RF ................................4.19-23, 4.19-24, 6.1-99 
INS NEW POINT..........................4.4-14, 4.4-16, 6.4-38 
INSERT RANGE ................................................4.16-42 
INSERT VALUE .................................................4.17-10 
INSERTION LOSS.................................4.4-14, 6.1-159 
INSTALL OPTION..............................................4.19-18 
LAST SPAN ...........................................................4.6-2 
LEFT LIMIT......................4.14-8, 4.15-3, 6.1-45, 6.1-46 
LIMIT ON/OFF .........................................4.16-4, 6.1-46 
LINES 625 / 525.....................................4.10-8, 6.1-240 
LOCAL ............................................................4.3-1, 5.6 
LOGO ON/OFF ......................................4.18-4, 6.1-103 
LOWPASS 100 KHZ ..................4.4-23, 4.4-31, 6.1-167 
LOWPASS 15 KHZ ....................4.4-23, 4.4-31, 6.1-167 
LOWPASS 3 KHZ ......................4.4-23, 4.4-31, 6.1-167 
MAIN PLL BANDWIDTH ......................................4.8-10 
MAKE DIRECTORY.............................4.20-12, 6.1-129 
MANUAL................................................................4.5-3 
MANUAL AVG OFF .................................4.4-8, 6.1-187 
MARGIN............................................................. 4.16-44 
MARKER 1 to 4.......4.13-2, 6.1-14, 6.1-15, 6.1-45, 6.1-47 
MARKER DEMOD ...................................4.14-9, 6.1-49 
MARKER NORM/DELTA .................4.13-2, 6.1-12, 6.1-14 
MARKER ZOOM......................................4.13-6, 6.1-57 
MAX HOLD ..............................4.11-2, 4.16-19, 6.1-105 
MAX HOLD ON/OFF.......4.16-5, 6.1-78, 6.1-80, 6.1-82, 

...........................................................................  6.1-83 

MEAN...................................................... 4.16-4, 6.1-79 
MEAS TIME AUTO.................... 4.4-41, 4.4-43, 6.1-199 
MEAS TIME MANUAL............... 4.4-41, 4.4-43, 6.1-199 
MEAS REF ........................................... 4.4-13, 6.1-88 
MEAS->REF.......4.4-7, 4.4-26, 4.4-32, 6.1-187, 6.1-200 
MIN...............................................4.15-4, 6.1-13, 6.1-44 
MIN HOLD...............................................4.11-4, 6.1-105 
MIXER................................................................. 4.4-39 
MIXER LOW NOISE.............................................. 4.7-3 
MKR -> CF STEPSIZE ............................ 4.15-4, 6.1-49 
MKR -> TRACE .. 4.13-6, 4.14-10, 4.15-4, 6.1-14, 6.1-45 
MKR DEMOD ON/OFF............................ 4.14-9, 6.1-50 
MKR FILE EXPORT ............................................ 4.13-8 
MKR STOP TIME .................................. 4.14-10, 6.1-49 
MODULATION................................................... 4.22-16 
MODULATION DEPTH.......................... 4.16-39, 6.1-52 
MODULATION SPECTRUM.....................4.4-24, 6.1-17 
MULT CARR ACP ............................................... 4.16-9 
N dB DOWN.................... 4.14-6, 4.14-10, 6.1-54, 6.1-55 
NAME...... 4.17-7, 6.1-22, 6.1-23, 6.1-32, 6.1-36, 6.1-38 
NETWORK .............................................. 4.23-1, 4.23-2 
NEW.................................................................... 4.19-4 
NEW FAKTOR .................................................... 4.19-6 
NEW LIMIT LINE............ 4.17-7, 6.1-22, 6.1-23, 6.1-32, 
, ..............................................................  6.1-35, 6.1-37 
NEXT MIN ........................4.15-5, 6.1-13, 6.1-43, 6.1-44 
NEXT MIN LEFT.................................................. 4.15-5 
NEXT MIN RIGHT ............................................... 4.15-5 
NEXT PEAK ......... 4.15-2, 6.1-12, 6.1-13, 6.1-42, 6.1-43 
NEXT PEAK LEFT............................................... 4.15-3 
NEXT PEAK RIGHT ............................................ 4.15-2 
NO OF SAMPLES ................................. 4.16-31, 6.1-90 
NO. OF ADJ CHAN ............................. 4.16-14, 6.1-188 
NO. OF HARMONICS ..............................4.16-50, 6.1-67 
NO. OF TX CHAN ............................... 4.16-14, 6.1-192 
NOISE CORR ON/OFF ....................... 4.16-11, 6.1-192 
NOISE MEAS .......................................... 4.14-2, 6.1-55 
NOISE SRC ON/OFF ............................ 4.19-2, 6.1-100 
NORMALIZE ............................. 4.22-7, 4.23-5, 6.1-160 
NUMBER OF SWEEPS......................... 4.16-6, 6.1-195 
OCCUP BW ON/OFF .................4.16-25, 6.1-70, 6.1-74 
OCCUPIED BANDWIDTH ......... 4.16-25, 6.1-74, 6.1-97 
OPTIMIZED COLORS ......................................... 4.21-7 
OPTIONS .......................................................... 4.19-18 
PATH 2 INS LOSS .............................................. 4.4-14 
-PEAK ................................................... 4.4-26, 6.1-143 
PEAK...... 4.14-2, 4.15-1, 4.16-3, 6.1-12, 6.1-43, 6.1-81,  
PEAK EXCURSION..................... 4.14-8, 4.15-5, 6.1-44 
PEAK HOLD ON/OFF............................ 4.4-22, 6.1-149 
PEAK LIST .............................................. 4.14-7, 6.1-50 
PEAK LIST OFF ...................................... 4.14-8, 6.1-50 
PEAK SEARCH............. 4.13-5, 4.14-5, 4.14-8, 4.16-44 
-PEAK/2 ................................................ 4.4-21, 6.1-143 
PEAKS PER PEAKS ......................................... 4.16-44 
PERCENT MARKER ............................. 4.16-30, 6.1-47 
PH NOISE ON/OFF................................. 4.14-5, 6.1-11 
PHASE NOISE ........................................ 4.14-4, 6.1-11 
PHASE WRAP ON/OFF .......................... 4.4-38, 6.1-19 
PM............................................................4.4-19, 6.1-17 
PM UNIT RAD/DEG .............................. 4.4-38, 6.1-241 
POLARITY POS/NEG . 4.10-2, 4.10-5, 6.1-197, 6.1-240 
POWER ABS/REL................................... 4.16-5, 6.1-79 
POWER MODE ......................................4.16-19, 6.1-69 
POWER ON/OFF 4.16-3, 6.1-77, 6.1-79, 6.1-81, 6.1-84 
POWER REF ON/OFF .............. 4.4-17, 6.1-135, 6.4-38 
POWER SPLITTER............................... 4.4-13, 6.1-159 
PREAMP ............................................... 4.19-3, 6.1-120 
PREDEFINED COLORS 4.18-5, 4.21-8, 6.1-103, 6.1-112 
PRINT SCREEN........ 4.21-2, 6.1-114, 6.1-115, 6.1-130 
PRINT TABLE ........... 4.21-2, 6.1-114, 6.1-115, 6.1-130 
PRINT TRACE........... 4.21-2, 6.1-114, 6.1-115, 6.1-130 

Summary of Contents for FSMR




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for FSMR

JCM Technologies WAVE500 Quick Start Manual preview
WAVE500
Brand: JCM Technologies Pages: 3
Jensen MS4200RS - Navigation System With CD Player User'S Manual & Installation Instructions preview
MS4200RS - Navigation System With CD Player
Brand: Jensen Pages: 65
Yaesu FT-7900R Operating Manual preview
FT-7900R
Brand: Yaesu Pages: 84
Yaesu FT-7800R Brochure & Specs preview
FT-7800R
Brand: Yaesu Pages: 2
Yaesu FT-747GX Operating Manual preview
FT-747GX
Brand: Yaesu Pages: 42
Yaesu FT-5200 User Manual preview
FT-5200
Brand: Yaesu Pages: 46
Yaesu FT-991 Key Press Sequences preview
FT-991
Brand: Yaesu Pages: 2
Yaesu FT-991 Reference Book preview
FT-991
Brand: Yaesu Pages: 20
Yaesu FT-991 Operating Manual preview
FT-991
Brand: Yaesu Pages: 96
Yaesu FT-8800R Technical Supplement preview
FT-8800R
Brand: Yaesu Pages: 55
Yaesu FT-60R Specifications preview
FT-60R
Brand: Yaesu Pages: 2
Yaesu FT-51R Owner'S Manual preview
FT-51R
Brand: Yaesu Pages: 78
Yaesu FT DX 9000 CONTEST - 2 Technical Supplement preview
FT DX 9000 CONTEST - 2
Brand: Yaesu Pages: 410
Yaesu FT-857 series Operation Manual preview
FT-857 series
Brand: Yaesu Pages: 132
Yaesu FT-100 Micro Mobile Undocumented preview
FT-100 Micro Mobile
Brand: Yaesu Pages: 55
Yaesu FT-2000 - MENU MODE LIST Technical Supplement preview
FT-2000 - MENU MODE LIST
Brand: Yaesu Pages: 206
Yaesu FTM-400XDR Operating Manual preview
FTM-400XDR
Brand: Yaesu Pages: 17
Yaesu FT-2000 - MENU MODE LIST Manual preview
FT-2000 - MENU MODE LIST
Brand: Yaesu Pages: 18

Brands by name

Popular brands

Load more brands