R&S FSMR, Operating Manual

Page: 678 / 955

SENSe:ADEMod - Subsystem R&S FSMR
1313.9723.12 6.1-142 E-1
[SENSe:]ADEMod:DETector:PPEak:MODE ABSolute | RELative
This command switches on absolute or relative measurement for the plus peak detector in the
modulation summary. Each time the relative measurement mode is switched on, the current
measured value is taken as a reference for the subsequent relative measurements. This command
is executed independently of the settings for the other detectors.
Example: "
ADEM:DET:PPE:MODE REL
" 'Switches on the relative measurement
for the plus peak detector.
Characteristics: *RST value: ABS
SCPI: device-specific
[SENSe:]ADEMod:DETector:PPEak:REFerence <numeric_value>
This command sets or queries the reference value for the relative measurement for the plus peak
detector in the modulation summary.
Example: "
ADEM ON
" 'Switches on the demodulator.
"
CALC2:FEED 'XTIM:FM:TDOM'
" 'Switches on the FM modulation summary.
"
ADEM:DET:PPE ON
" 'Switches on the plus peak detector.
"
ADEM:DET:PPE:MOD REL
" 'Switches on the relative measurement
for the plus peak detector.
"
ADEM:DET:PPE:REF 20 kHz
" 'Sets the reference value.
Characteristics: *RST value: 0
SCPI: device-specific
[SENSe:]ADEMod:DETector:PPEak:REFerence:AUTO ONCE
This command uses the current measured value as a reference for the relative measurement for the
plus peak detector in the modulation summary.
Example: "
ADEM:DET:PPE:REF:AUTO ONCE
" 'Uses the current measured value
as a reference for the relative
measurement.
Characteristics: *RST value: -
SCPI: device-specific
This command is an event and therefore has no *RST value and no query.
[SENSe:]ADEMod:DETector:PPEak[:STATe] ON | OFF
This command switches on or off the plus peak detector in the modulation summary. The command
is executed independently of the settings for the other detectors.
Example: "
ADEM ON
" 'Switches on the demodulator.
"
CALC2:FEED 'XTIM:FM:TDOM
" 'Switches on the FM modulation summary.
"
ADEM:DET:PPE ON
" 'Switches on the plus peak detector.
Characteristics: *RST value: ON
SCPI: device-specific
[SENSe:]ADEMod:DETector:REFerence AOFF
This command switches from relative-value to absolute-value display for all measured values shown
in the modulation summary. This is also the default setting of the detectors.
Example: "
ADEM:DET:SIN:REF AOFF
" 'Selects absolute-value display
'for all measured values shown.
Characteristics: *RST value: -
SCPI: device-specific
This command is an event and therefore has no *RST value and no query.