R&S FSMR, Operating Manual

Page: 470 / 955

LAN Interface R&S FSMR
1166.3363.12 4.24-24 E-2
Click Share this folder .
The following settings can optionally be
changed:
Share name:
the name under which the directory
appears in the Explorer
Comment:
a comment regarding the shared directory
User Limit:
the number of users that may access the
directory at the same time
Permissions:
the rights of the users (read only, read and
write, all)
Caching:
local buffering of directory contents for
fast access
Confirm settings with
OK .
The drive is shared and this is shown in
the Explorer by a hand under the directory
symbol:
Remote Monitoring of R&S FSMR via XP Remote Desktop
Introduction
In production test and measurements, the question of how to centrally monitor measuring instruments
that are used for remote servicing/diagnostics is often arises. With the remote desktop of Windows XP,
the new Spectrum Analyzer Family R&S FSMR offers ideal preconditions for use in production:
•
Access to operating functions via virtual front panel ( soft front panel )
•
Printout of measurement results directly from the controller
•
Storing measurement data to the hard disk of the controller
The analyzer is connected via LAN. XP also supports the connection via data transmission (via modem).
This section describes the configuration of R&S FSMR and the remote desktop client of the control PC.
For details on setting up the data transmission link, see relevant XP literature.