R&S FSMR, Operating Manual

Page: 609 / 955

R&S FSMR CALCulate Subsystem
1313.9723.12 6.1-73 E-1
CALCulate<1|2>:MARKer<1 to 4>:FUNCtion:STRack:THReshold -330dBm to +30dBm
This command defines the threshold above which the largest signal is searched for in the selected
measurement window. The function is independent of the selected marker, i.e. the numeric suffix <1
to 4> of MARKer is irrelevant. It is only available in the frequency domain (span > 0)..
The entry of the search bandwidth is only possible if the Signal Track function is switched on
(
CALC:MARK:FUNC:STR ON
).
Example: "
CALC:MARK:FUNC:STR:THR -50DBM"
'Sets the threshold for signal tracking
'in screen A to -50 dBm.
Characteristics: *RST value: -120 dBm
SCPI: device-specific
CALCulate<1|2>:MARKer<1 to 4>:FUNCtion:STRack:TRACe 1 to 3
This command defines the trace on which the largest signal is searched for in the selected
measurement window. The function is independent of the selected marker, i.e. the numeric suffix <1
to 4> of MARKer is irrelevant. It is only available in the frequency domain (span > 0).
Example: "
CALC2:MARK:FUNC:STR:TRAC 3"
'Defines trace 3 in screen B as the
'trace for signal tracking.
Characteristics: *RST value: 1
SCPI: device-specific