R&S FSMR, Operating Manual

Page: 582 / 955

CALCulate Subsystem R&S FSMR
1313.9723.12 6.1-46 E-1
CALCulate<1|2>:MARKer<1 to 4>:X:SLIMits:RIGHt 0 to MAX (frequency | sweep time)
This command sets the right limit of the search range for markers and delta markers in the selected
measurement window. Depending on the x axis domain the indicated value defines a frequency
(span > 0) or time (span = 0). The function is independent of the selection of a marker, i.e. the
numeric suffix in MARKer<1 to 4> is irrelevant.
If the time domain power measurement is active, this command limits the evaluation range to the
trace.
The function is only available if the search limit for marker and delta marker is switched on
(CALC:MARK:X:SLIM ON).
Example: "
CALC:MARK:X:SLIM ON"
'Switches the search limit function on
'for screen A.
"
CALC:MARK:X:SLIM:RIGH 20MHz"
'Sets the right limit of the search range
'in screen A to 20 MHz.
Characteristics: *RST value: - is set to the right diagram border on switching on search
limits)
SCPI: device-specific
CALCulate<1|2>:MARKer<1 to 4>:X:SLIMits[:STATe] ON | OFF
This command switches between a limited (ON) and unlimited (OFF) search range in the selected
measurement window. The function is independent of the selection of a marker, i.e. the numeric
suffix MARKer<1 to 4> is irrelevant.
If the time domain power measurement is active, this command limits the evaluation range on the
trace.
Example: "
CALC:MARK:X:SLIM ON"
'Switches on search limitation in screen A.
Characteristics: *RST value: OFF
SCPI: device-specific
CALCulate<1|2>:MARKer<1 to 4>:X:SSIZe STANdard| POINts
This command control the knob increment/decrement of the marker position. STEPSIZE
STANDARD uses the grid resolution (span/625), STEPSIZE SWP POINTS uses the available sweep
points configured in the SWEEP menu.
Example: "
CALC:MARK:X:SSIZ POIN"
Characteristics: *RST value:
STANdard
SCPI: device-specific