R&S FSMR, Operating Manual

Page: 732 / 955

SENSe:SWEep Subsystem R&S FSMR
1313.9723.12 6.1-196 E-1
[SENSe<1|2>:]SWEep:TIME 2,5ms to 16000s (frequency domain) | 1
µ
s to 16000s (time domain )
This command defines the sweep time. The available time values are different in the frequency
domain (2.5 ms to 16000s with span > 0) and in the time domain (1
µ
s to 16000s with span = 0).
If
SWEep:TIME
is directly programmed, automatic coupling to resolution bandwidth and video
bandwidth is switched off.
This command is not available for GSM/EDGE measurements modulation accuracy
(MAC), phase/frequency error (PFE), power versus time (PVT ) and carrier power
(CPW).
Example:
"SWE:TIME 10s"
Characteristics: *RST value - (AUTO is set to ON)
SCPI: conforming
[SENSe<1|2>:]SWEep:TIME:AUTO ON | OFF
This command controls the automatic coupling of the sweep time to the frequency span and
bandwidth settings.
If
SWEep:TIME
is directly programmed, automatic coupling is switched off.
This command is not available for GSM/EDGE measurements modulation accuracy
(MAC), phase/frequency error (PFE), power versus time (PVT ) and carrier power
(CPW).
Example:
"SWE:TIME:AUTO ON"
'Switches on the coupling to frequency span
and bandwidths.
Characteristics: *RST value: ON
SCPI: conforming