R&S FSMR
CALCulate Subsystem
1313.9723.12
6.1-45
E-1
CALCulate<1|2>:MARKer<1 to 4>[:STATe]
ON | OFF
This command switches on or off the currently selected marker in the selected measurement
window. If no indication is made, marker 1 is selected automatically. If marker 2, 3 or 4 is selected
and used as a delta marker, it is switched to marker mode.
Example:
"
CALC:MARK3 ON"
'Switches marker 3 in screen A on or to marker mode.
Characteristics:
*RST value:
OFF
SCPI:
device-specific
CALCulate<1|2>:MARKer<1 to 4>:TRACe
1 to 3
This command assigns the selected marker (1 to 4) to the indicated measurement curve in the
selected measurement window. The corresponding trace must be active, i.e. its status must be
different from "BLANK".
If necessary the corresponding marker is switched on prior to the assignment.
Example:
"
CALC:MARK3:TRAC 2"
'
Assigns marker 3 in screen A to trace 2.
"
CALC2:MARK:TRAC 3"
'
Assigns marker 1 in screen B to trace 3.
Characteristics:
*RST value
-
SCPI:
device-specific
CALCulate<1|2>:MARKer<1 to 4>:X
0 to MAX (frequency | sweep time)
This command positions the selected marker to the indicated frequency (span > 0), time (span = 0) or level
(APD measurement or CCDF measurement ON) in the selected measurement window. If marker 2, 3 or
4 is selected and used as delta marker, it is switched to marker mode.
Example:
"
CALC1:MARK2:X 10.7MHz"
'Positions marker 2 in screen A to frequency
'10.7 MHz.
Characteristics:
*RST value:
-
SCPI:
device-specific
CALCulate<1|2>:MARKer<1 to 4>:X:SLIMits:LEFT
0 to MAX (frequency | sweep time)
This command sets the left limit of the search range for markers and delta markers in the selected
measurement window. Depending on the x axis domain the indicated value defines a frequency
(span > 0) or time (span = 0). The function is independent of the selection of a marker, i.e. the
numeric suffix in MARKer<1 to 4> is irrelevant.
If the time domain power measurement is active, this command limits the evaluation range to the
trace.
The function is only available if the search limit for marker and delta marker is switched
on
(CALC:MARK:X:SLIM ON).
Example:
"
CALC:MARK:X:SLIM ON"
'Switches the search limit function on
for screen A.
"
CALC:MARK:X:SLIM:LEFT 10MHz"
'Sets the left limit of the search range in
screen A to 10 MHz.
Characteristics:
*RST value:
- (is set to the left diagram border on switching on search limits)
SCPI:
device-specific
Summary of Contents for FSMR
