R&S FSMR, Operating Manual

Page: 568 / 955

CALCulate:LIMit Subsystem R&S FSMR
1313.9723.12 6.1-32 E-1
CALCulate:LIMit:CONTrol Subsystem
The CALCulate:LIMit:CONTrol subsystem defines the x axis (CONTrol-axis).
COMMAND PARAMETERS UNIT COMMENT
CALCulate<1|2>
:LIMit<1...8>
:CONTrol
[:DATA]
:DOMain
:MODE
:OFFSet
:SHIFt
:SPACing
<numeric_value>,<numeric_value>..
FREQuency|TIME
RELative|ABSolute
<numeric_value>
<numeric_value>
LINear | LOGarithmic HZ | S
HZ | S
HZ | S
CALCulate<1|2>:LIMit<1 to 8>:CONTrol[:DATA] <numeric_value>,<numeric_value>..
This command defines the X axis values (frequencies or times) of the upper or lower limit lines. The
values are defined independently of the measurement window.
Example: "
CALC:LIM2:CONT 1MHz,30MHz,100MHz, 300MHz,1GHz"
'Defines 5 reference values for the X axis of
'limit line 2
"
CALC:LIM2:CONT?"
'Outputs the reference values for the X axis of
'limit line 2 separated by a comma.
Characteristics: *RST value: - (LIMit:STATe is set to OFF)
SCPI: conforming
CALCulate<1|2>:LIMit<1 to 8>:CONTrol:DOMain FREQuency | TIME
This command defines the frequency or time domain for the x axis values.
Example: "
CALC:LIM2:CONT:DOM TIME"
'Defines the time domain for the X axis of limit
'line 2.
Characteristics: *RST value: FREQuency
SCPI: device-specific
CALCulate<1|2>:LIMit<1 to 8>:CONTrol:MODE RELative | ABSolute
This command selects the relative or absolute scaling for the X axis of the selected limit line. The
definition is independent of the measurement window.
Example: "
CALC:LIM2:CONT:MODE REL"
'Defines the X axis of limit line 2 as relatively
'scaled.
Characteristics: *RST value: ABSolute
SCPI: device-specific