R&S FSMR, Operating Manual, Page: 754 / 955

SYSTem Subsystem R&S FSMR
1313.9723.12 6.1-218 E-1
SYSTem:DISPlay:FPANel ON | OFF
This command activates or deactivates the display of the front panel keys on the screen.
With the display activated, the instrument can be operated on the screen using the mouse by
pressing the corresponding buttons. This may be useful if the instrument is operated in a detached
station by means of a remote program such as PCANYWHERE.
With the display of the front panel keys activated, the screen resolution of the unit is set
to 1024x768. Thus, only a section of the whole screen is visible on the internal LCD
display, which will be moved by mouse moves.
For a full display of the user interface, an external monitor has to be connected to the
rear panel.
When the front panel display is deactivated, the original screen resolution is restored.
Example:
"SYST:DISP:FPAN ON"
Characteristics: *RST value: OFF
SCPI: device-specific
SYSTem:DISPlay:UPDate ON | OFF
This command switches on or off the update of all display elements during remote control.
The best performance is obtained when the display output is switched off during
remote control.
Example:
" SYST:DISP:UPD ON
Characteristics: *RST value: OFF
SCPI: device specific
SYSTem:ERRor?
This command queries the earliest entry in the error queue, and deletes it after the readout.
Positive error numbers indicate device-specific errors, negative error numbers are error messages
defined by SCPI (cf. Chapter 9). If the error queue is empty, the error number 0, "no error", is
returned. This command is identical with the command
STATus:QUEue:NEXT?
. This command is a
query and therefore has no *RST value.
Example:
"SYST:ERR?"
Characteristics: *RST value: –
SCPI: conforming