R&S FSMR
Analyzer - MEAS
1166.3363.12
4.16-9
E-2
switched on, a pass/fail information indicating that the power has been exceeded is displayed during the
measurement in the table in the lower half of the screen.
With the CP/ACP measurement switched on the functions SPLIT SCREEN and FULL
SCREEN are inhibited.
The channel configuration is defined in the
MEAS - CHAN PWR ACP
or the MEAS - MULT CARR ACP
menu
.
CP/ACP
ABS REL
SET CP
REFERENCE
CP/ACP
CONFIG
ADJUST
REF LVL
CP/ACP
STANDARD
NO. OF
ADJ CHAN
CHANNEL
SPACING
ACP REF
SETTINGS
CHANNEL
BANDWIDTH
CHAN PWR
/ HZ
CP/ACP
ON OFF
CHAN PWR
ACP
SWEEP
TIME
NOISE CORR
ON
OFF
FAST ACP
ON OFF
ACP LIMIT
CHECK
EDIT
ACP LIMIT
ADJUST
SETTINGS
NOISE CORR
ON OFF
DIAGRAM
FULL SIZE
NO. OF
TX CHAN
MULT CARR
ACP
SELECT
TRACE
POWER
MODE
CLEAR
WRITE
MAX
HOLD
The
CHAN PWR ACP
and
MULT
CARR ACP softkeys
activate
channel or adjacent-channel power
measurement either for a single
carrier signal (
CHAN PWR ACP
) or
for several carrier signals (
MULT
CARR ACP
), depending on the
current measurement configura-
tion. In addition, they open a
submenu
for
defining
the
parameters for channel power
measurement. The softkey selected
is shown in colour to indicate that a
channel or adjacent-channel power
measurement is active.
The softkeys are available only for measurements in the frequency domain
(span > 0).
CP/ACP
ON OFF
The
CP/ACP ON/OFF
softkey switches calculation of the channel power or
adjacent-channel power on and off.
With default settings the measurement is performed by integrating the powers at
the display points within the specified channels (IBW method).
The powers of the adjacent channels are measured either as absolute values or
as relative values referenced to the power of a transmission channel. The
default setting is relative-value measurement (see
CP/ACP ABS/REL
softkey).
When multicarrier ACP measurement is activated, the number of test points is
increased to ensure that adjacent-channel powers are measured with adequate
accuracy.
IEC/IEEE-bus commands:
CALC:MARK:FUNC:POW:SEL CPOW|ACP|MCAC
CALC:MARK:FUNC:POW:RES? CPOW|ACP|MCAC
CALC:MARK:FUNC:POW OFF
Summary of Contents for FSMR
