R&S FSMR, Operating Manual

Page: 762 / 955

TRACe - Subsystem R&S FSMR
1313.9723.12 6.1-226 E-1
Number and format of the measurement values for the different operating modes
The number of measurement values depends on the instrument setting:
SPECTRUM mode (span > 0 and zero span):
625 results are output in the unit selected for display.
For spurious emissions measurement the number of results is the sum of all sweep points, specified
in the sweep list configuration.
With AUTO PEAK detector, only positive peak values can be read out.
Trace data can be written into the instrument with logarithmic display only in dBm, with
linear display only in volts.
FORMat REAL,32 is to be used as format for binary transmission, and FORMat ASCii for ASCII
transmission.
SPURious reads the peak list in the spurious measurement. As results a list of frequency, level and
delta to limit line values is returned. A delta limit of +200dB indicates no limit check is active.
TRACe<1|2>:COPY
TRACE1| TRACE2| TRACE3|
This command copies data from one trace to another. The second operand describes the source,
the first operand the destination of the data to be copied.The associated measurement window is
selected with the numeric suffix of TRACe<1|2>.
Example:
"TRAC:COPY TRACE1,TRACE2"
Characteristics: *RST value:
SCPI: conforming
TRACe<1|2>:IMMediate:LEVel?
This query returns the current Y results of the sweep. During a sweep the last measured value is read out.
Example:
"INIT:CONT OFF"
'switches to single sweep mode
"INIT"
'starts a sweep (without waiting for the sweep end!)
"TRAC1:IMM:LEV?"
'queries the level of the last measured measurement point
Characteristics: *RST value:
SCPI: conforming
TRACe<1|2>:IMMediate:RESult?
This query returns the current X and Y results of the sweep. During a sweep the last measured
values are read out.
Example:
"INIT:CONT OFF"
'switches to single sweep mode
"INIT"
'starts a sweep (without waiting for the sweep end!)
"TRAC:IMM:RES?"
'queries the X and Y values of the last measured
'measurement point
Characteristics: *RST value:
SCPI: conforming