R&S FSMR, Operating Manual, Page: 563 / 955

R&S FSMR CALCulate:MARKer Subsystem
1313.9723.12 6.1-27 E-1
"
CALC:LIM:ACP:ACH:RES?"
'Queries the limit check result in the adjacent
'channels in screen A.
Characteristics: *RST value: --
SCPI: device-specific
This command is a query and therefore has no *RST value.
CALCulate<1|2>:LIMit<1 to 8>:ACPower:ALTernate<1 to 11>:ABSolute -200DBM to 200DBM,
-200DBM to .200DBM
This command defines the absolute limit value for the lower/upper alternate adjacent channel power
measurement (Adjacent Channel Power) in the selected measurement window.
The numeric suffix after
ALTernate<1 to 11>
denotes the alternate channel. The numeric
suffixes <1 to 8> are irrelevant for this command.
It should be noted that the absolute limit value for the limit check has no effect as soon as it is below the
relative limit value defined with
CALCulate:LIMit:ACPower:ALTernate<1 to 11>:RELative
.
This mechanism allows automatic checking of the absolute basic values defined in mobile radio standards
for the power in adjacent channels.
Parameter: The first value is the limit for the lower and the upper alternate adjacent channel.
The second limit value is ignored but must be indicated for reasons of
compatibility with the FSE family.
Example: "
CALC:LIM:ACP:ALT2:ABS -35DBM, -35DBM"
'Sets the absolute limit value in
'screen A for the power in the lower
'and upper second alternate
'adjacent channel to -35 dBm.
Characteristics: *RST value: -200DBM
SCPI: device-specific