R&S FSMR, Operating Manual

Page: 620 / 955

CALCulate Subsystem R&S FSMR
1313.9723.12 6.1-84 E-1
CALCulate:PEAKsearch I PSEarch Subsystem
CALCulate<1|2>:PEAKsearch|PSEarch:AUTO ON | OFF
By using this command, the peak list in the spurious measurement is calculated automatically after
a measurement. For each range, exactly one peak value is calculated.
The SENSe suffix is unused.
Example:
"CALC:PEAK:AUTO ON"
Switches the automatic peak search on.
Characteristics: *RST value: OFF
SCPI: device-specific
CALCulate<1|2>:PEAKsearch|PSEarch[:IMMediate]
This command activates the generation of a peak list.
The numeric suffix in CALCULATE<1|2> is not significant.
Example: "CALC:PEAK"
Characteristics: *RST value: -
SCPI: device-specific
This command is an event and therefore has no *RST value and no query.
CALCulate<1|2>:PEAKsearch|PSEarch:MARGin MINimum .. MAXimum
This command defines the margin for the peak search.
The numeric suffix in CALCULATE<1|2> is not significant.
Example: "CALC:PEAK:MARG 5 dB"
Characteristics: *RST value: 6 dB
SCPI: device-specific
CALCulate<1|2>:PEAKsearch|PSEarch:SUBRanges 1 to 500
This command defines the number of subranges for the peak search.
The numeric suffix in CALCULATE<1|2> is not significant.
Example: "CALC:PEAK:SUBR 10"
Characteristics: * RST value: 25
SCPI: device-specific