R&S FSMR, Operating Manual

Page: 808 / 955

Comparison of R&S FSMR and FSE Commands R&S FSMR
1166.3363.12 6.3-9 E-1
Devices Command Parameter Notes
R&S FSMR +
FSE
CALCulate<1|2>:MATH:STATe ON | OFF
for R&S FSMR, traces can
only be subtracted from trace
1; therefore there is no
numeric suffix behind :MATH
R&S FSMR +
FSE
CALCulate<1|2>:MATH[:EXPRession][:DEFine] <expr>
for R&S FSMR, traces can
only be subtracted from trace
1; therefore there is no
numeric suffix behind :MATH
and <expr> may only consist
of (TRACE1-TRACE2) or
(TRACE1-TRACE3)
FSE CALCulate<1|2>:RLINe MIN to MAX not available for R&S FSMR
(replaced by
CALC:MATH:POS)
FSE CALCulate<1|2>:RLINe:STATe ON | OFF not available for R&S FSMR
(replaced by
CALC:MATH:POS)
R&S FSMR +
FSE
CALCulate<1|2>:THReshold MIN to MAX
R&S FSMR +
FSE
CALCulate<1|2>:THReshold:STATe ON | OFF
FSE CALCulate<1|2>:TLINe<1|2> 0 to 1000s not available on the R&S
FSMR; replaced by
CALC:SLIMits:LEFT and
CALC:SLIMits:RIGHt
FSE CALCulate<1|2>:TLINe<1|2>:STATe ON | OFF not available on the R&S
FSMR; replaced by
CALC:SLIMits:LEFT and
CALC:SLIMits:RIGHt
FSE CALCulate<1|2>:UNIT:ANGLe DEG | RAD not available for R&S FSMR
R&S FSMR CALCulate<1|2>:UNIT:POWer DBM | V| A| W | DBPW |
WATT | DBUV | DBMV |
VOLT | DBUA | AMPere available units are compatible
to the FSE
FSET/
ESI
CALCulate<1|2>:UNIT:POWer DBM | V | W | DB | PCT |
UNITLESS | DBPW |
WATT | DBUV | DBMV |
VOLT | DBUA | AMPere |
DBPT | DBUV_MHZ |
DBMV_MHZ | DBUA_MHZ
| DBUV_M | DBUA_M |
DBUV_MMHZ |
DBUA_MMHZ the R&S FSMR supports the
following units:DBM | V| A| W
| DBPW | WATT | DBUV |
DBMV | VOLT | DBUA |
AMPere
FSE/
FSIQ
CALCulate<1|2>:UNIT:POWer DBM | V | W | DB | PCT |
UNITLESS | DBPW |
WATT | DBUV | DBMV |
VOLT | DBUA | AMPere |
DBUV_MHZ | DBMV_MHZ
| DBUA_MHZ | DBUV_M |
DBUA_M | DBUV_MMHZ |
DBUA_MMHZ the R&S FSMR supports the
following units:DBM | V| A| W
| DBPW | WATT | DBUV |
DBMV | VOLT | DBUA |
AMPere
FSE CALCulate<1|2>:X:UNIT:TIME S | SYM not available for R&S FSMR
R&S FSMR CALibration:ABORt new function for R&S FSMR
FSE CALibration:BANDwidth | BWIDth[:RESolution]? not available for R&S FSMR
FSE CALibration:IQ? not available for R&S FSMR
FSE CALibration:LDETector? not available for R&S FSMR
FSE CALibration:LOSuppression? not available for R&S FSMR
FSE CALibration:PPEak? not available for R&S FSMR
ESI CALibration:PRESelector? not available for R&S FSMR
R&S FSMR CALibration:RESult? new function for R&S FSMR
FSE CALibration:SHORt? not available for R&S FSMR
R&S FSMR +
FSE
CALibration:STATe ON | OFF
R&S FSMR +
FSE
CALibration[:ALL]?
FSE CONFigure:BURSt:PFERror:COUNt 1 to 1000 not available for R&S FSMR
and FSET
FSE CONFigure:BURSt:PFERror[IMMediate] not available for R&S FSMR
and FSET
FSE CONFigure:BURSt:POWer:CONDition NORMal | EXTReme not available for R&S FSMR
and FSET
FSE CONFigure:BURSt:POWer:COUNt 1 to 1000 not available for R&S FSMR
and FSET