R&S FSMR, Operating Manual

Page: 949 / 955

Error Messages R&S FSMR
1166.3363.12 9.2 E-1
SCPI-Specific Error Messages
No Error
Error code
Error text in the case of queue poll
Error explanation
0
No error
This message is output if the error queue does not contain any entries.
Command Error - Faulty command; sets bit 5 in the ESR register.
Error code Error text in the case of queue poll
Error explanation
-100
Command Error
The command is faulty or invalid.
-101
Invalid Character
The command contains an invalid sign.
Example: A header contains an ampersand, "
SENSe& ".
-102
Syntax error
The command is invalid.
Example: The command contains block data the instrument does not accept.
-103
Invalid separator
The command contains an imallowed sign instead of a separator.
Example: A semicolon is missing after the command.
-104
Data type error
The command contains an invalid value indication.
Example: ON is indicated instead of a numeric value for frequency setting.
-105
GET not allowed
A Group Execute Trigger (GET) is within a command line.
-108
Parameter not allowed
The command contains too many parameters.
Example: Command
SENSe:FREQuency:CENTer permits only one frequency indication.