background image

Table of Contents

 

Rev. 8/17/2020 

   MINI-SH, MANUAL 

Table of Contents

 

Created 2019 Vestil Manufacturing Corp.                                                               Page 1 of 8 

 

 

 

 

                 

 

 

MINI-SH Counterweight Adaptor for MINI-2, MINI-4, MINI-7, & MINI-10 Hoists 

Instruction Manual 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Receiving Instructions  

After delivery,  remove the packaging from the product. Inspect the product closely to determine whether it 

sustained damage during transport. If damage is discovered, record a complete description of it on the bill of lading. 

If the product is undamaged, discard the packaging.

 

 

NOTE:

 

The end-user is solely responsible for confirming that product design, use, and maintenance comply with 

laws, regulations, codes, and mandatory standards applied where the product is used.

 

 

Technical Service & Replacement Parts  

For answers to questions not addressed in these instructions and to order replacement parts, labels, and 

accessories, call our Technical Service and Parts Department at (260) 665-7586. The department can also be 

contacted online at 

http://www.vestilmfg.com/parts_info.htm

.

 

 

Electronic Copies of Instruction Manuals 

Additional copies of this instruction manual may be downloaded from 

https://www.vestil.com/page-manuals.php

. 

 

 

Vestil Manufacturing Corp. 

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 

Telephone: (260) 665-7586  -or-  Toll Free (800) 348-0868 

Fax: (260) 665-1339 

Web: 

www.vestilmfg.com

     e-Mail: 

[email protected]

 

 

 

 

Table of Contents 

Signal Words

………………..………………………………………………………………………………………………….... 

2

 

Safety Instructions

…………………………………………………………………………………..………………………......

2

 

Assembly

…………………...…..………………………………………………………………………………………………… 

3

 

Counterweight Adjustment

…..…………...…………………………………………………………………………………….

3

 

Record of Satisfactory Condition

………………………………………………………………………………………………. 

3

 

National Standards

……………………………………………………………………………………………………………. 

3

 

Specifications

………..………………………………………………………………………………………………....…….

  

4

  

5

  

Exploded Views and Bills of Materials

……..…………….………………………………………………...................

6

  

7

 

Labeling Diagram

………………………………………………………………………………………………………………… 

7

 

Limited Warranty

……………..…………………………………………………………………………………………......... 

8

 

Summary of Contents for MINI-SH









Reviews: