R&S FSMR, Operating Manual

Page: 279 / 955

R&S FSMR Analyzer - MKR ->
1166.3363.12 4.15-7 E-2
PEAK: Signal 1
NEXT PEAK: Signal 2
NEXT PEAK: Signal 2 (no further signal detected)
or
PEAK: Signal 1
NEXT PEAK LEFT: Signal 1 (no further signal detected)
NEXT PEAK RIGHT: Signal 2
NEXT PEAK RIGHT: Signal 2 (no further signal detected)
With 6 dB peak excursion , all signals will be detected with NEXT PEAK and
NEXT PEAK RIGHT / NEXT PEAK LEFT.
Order of signals detected:
Order of signals detected:
PEAK: Signal 1
NEXT PEAK: Signal 2
NEXT PEAK: Signal 3
NEXT PEAK: Signal 4
or
PEAK: Signal 1
NEXT PEAK LEFT: Signal 3
NEXT PEAK RIGHT: Signal 1
NEXT PEAK RIGHT: Signal 2
NEXT PEAK RIGHT. Signal 4
V
The AUTO MAX PEAK softkey adds an automatic peak search action for
marker 1 at the end of each particular sweep. This function may be used
during adjustments of a device under test to keep track of the current peak
marker position and level.
The current marker search limit settings (LEFT LIMIT, RIGHT LIMIT,
THRESHOLD, EXCLUDE LO) are taken into account.
IEC/IEEE-bus command:
CALC:MARK:MAX:AUTO ON | OFF
The AUTO MIN PEAK softkey adds an automatic peak search action for
marker 1 at the end of each particular sweep. This function may be used
during adjustments of a device under test to keep track of the current peak
marker position and level.
The current marker search limit settings (LEFT LIMIT, RIGHT LIMIT,
THRESHOLD, EXCLUDE LO) are taken into account.
IEC/IEEE-bus command:
CALC:MARK:MIN:AUTO ON | OFF