Radwin 5000 HPMP, User Manual

Page: 495 / 518

RADWIN 5000 HPMP User Manual Release 3.5.70 C ‐ 76
MIB Traps
pdTooHighDueCbwLimitations 132 major Indicates that link cannot be established because link
range is too large for channel bandwidth.
hbsEncryptionAlarm 133 major Indicates an encryption key mismatch. Contains a
single parameter which is its description including the
HSU's name
hbsEhServiceClosedToHsu 134 major Indicates an encryption key mismatch. Contains a
single parameter which is its description including the
HSU's name
hbsUnsynchronizedHsuAlarm 135 warning Indicates a registered HSU lost synchronization.
hbsInactiveHbsAlarm 136 major Indicates HBS is InActive.
incompatibleHsu 137 critical Indicates that the HSU is not compatible to HBS.
Contains a single parameter which is its description: 1 ‐
Description: Incompatible ODUs.
hsuUnsupportedBeacon 138 warning Indicates an unsupported beacon has arrived at HSU
lanPortDisconnectedAlarm 139 major Indicates the LAN port status changed to disconnected.
Contains a single parameter, which is its description:
1 ‐ Description: LAN port status changed to
disconnected.
poePortDisconnectedAlarm 140 major Indicates the POE port status changed to disconnected.
Contains a single parameter, which is its description:
1 ‐ Description: POE port status changed to
disconnected.
poePowerConsumptionAlarm 141 major Indicates the POE Power Consumption is above allowed
maximum.
Contains
a single parameter, which is its description:
1 ‐ Description: POE consumption above allowed
maximum. port closed.
hobupFaultyStateAlarm 149 major This Alarm will indicate that the Hot Backup module is in
faulty state.
1 ‐ Description: Hot Backup fault detected: %s unit.
%s ‐ Primary Or Secondary Unit
gpsOverCurrentAlarm 150 major Indicates the GPS Antenna current consumption is
above allowed maximum.
Contains a single parameter, which is its description:
1 ‐ Description: GPS Antenna current consumption
above allowed maximum. GPS closed.
gpsCommunicationFailiureAlarm 151 major Indicates the GPS data isn't received.
Contains a single parameter, which is its description:
1 ‐ Description: GPS Communication failiure.
temperatureThresholdAlarm 152 major Indicates the board temperature is above allowed
maximum.
Contains
a single parameter, which is its description:
1 ‐ Description: GPS Antenna current consumption
above allowed maximum. GPS closed.
localRouterDiscoveryStatus 153 major This Alarm will indicate that we have no connection
with Track side router.
1 ‐ Description: MacLearningUpdate detected
disconnection with Track side router %s
%s ‐ Default gateway IP
TrackRouterDiscoveryStatus 154 major This Alarm will indicate that we have no connection
with Track side router.
1 ‐ Description: MacLearningUpdate detected
disconnection with Track side router %s
%s ‐ Default gateway IP
btsTargetUnreachable 156 major This Alarm will indicate that we have no connection
with Bts desired target.
1 ‐ Description: TNC detected disconnection with the
BTS target %s
%s ‐ Default gateway IP
Table C ‐ 4: MIB Traps (Sheet 5 of 8)
Name ID Severity Description