Radwin 5000 HPMP, User Manual

Page: 112 / 518

RADWIN 5000 HPMP User Manual Release 3.5.70 5 ‐ 43
What Comes Next?
Restore Alerts
Many alert messages in the RADWIN Manager have an option of the form “Do not show this
message again”. These alert messages can be reverted to their default state (shown) by
clicking the Restore Alerts button. You will be asked to confirm:
Check for Updates
If you are not connected to the Internet, disable the Check for updates check box.
Enable RSS Balance Indication for Mobility
Checking this item places a colored rectangle around unbalanced RSS fields in card view.
Enable RSS Extended View
Checking this box enables an extended card in Table view. See Figure 6 ‐ 8 and Figure 9 ‐ 2 .
Monitoring and Timeout Intervals
The monitoring interval determines the lowest interval between request to the ODU for
status updates. The timeout (default 1 sec, maximum 5 sec) may have to be increased if you
are on a slow network.
Setting the Map View Background Mode
You have a choice of two map providers, a default or a self ‐ chosen background. If you log on
without an Internet connection, you will get a default gray background or, if you have caching
enabled, your last used map.
What Comes Next?
The purpose of this chapter was to offer an overview of a running RADWIN 5000 a sector. The
next three chapters will cover respectively, detailed sector setup considerations, sector
management and monitoring and diagnostics. The foregoing background should provide
sufficient “signposts” to ensure that you do not become lost in the plethora of details
required to commission and manage a fully operational sector.