Radwin 5000 HPMP, User Manual

Page: 481 / 518

RADWIN 5000 HPMP User Manual Release 3.5.70 C ‐ 62
Private MIB Parameters
winlink1000IduTdmConfigEntry N/A IDU TDM Links Configuration table entry.
INDEX { winlink1000IduTdmConfigIndex }
winlink1000IduTdmConfigIndex RO Table index.
winlink1000IduTdmIfIndex RO Link index in the interface table.
winlink1000IduTdmLineCoding RW This parameter applies to T1 trunks only. The
parameter controls the line coding. Setting the
value to each of the indices applies to all. A
change is effective after the next open of the
TDM service.
winlink1000IduTdmLoopbackConfig RW Loop back configuration table. Each of the
trunks can be set Normal Line loop back or
Reverse line loop back. A change is effective
immediately.
winlink1000IduTdmLineStatus RO Line status.
winlink1000IduTdmCurrentTable N/A IDU TDM Links Statistics table.
winlink1000IduTdmCurrentEntry N/A IDU TDM Links Statistics table entry. INDEX {
winlink1000IduTdmCurrentIndex }
winlink1000IduTdmCurrentIndex RO Table index (Same as
winlink1000IduTdmLineIndex).
winlink1000IduTdmCurrentBlocks RO Number of correct blocks transmitted to the
line.
winlink1000IduTdmCurrentDrops RO Number of error blocks transmitted to the line.
winlink1000IduTdmCurrentTxClock RW TDM Transmit Clock. A change is effective after
re ‐ activation of the TDM service.
winlink1000IduTdmCurrentBlocksHi
gh RO High part of the 64 bits counter Current Blocks
winlink1000IduTdmRemoteQual RO Estimated average interval between error
second events. The valid values are 1 ‐ 2^31
where a value of ‐ 1 is used to indicate an
undefined state.
winlink1000IduTdmRemoteQualEva
l RO Estimated average interval between error
second events during evaluation process. The
valid values are 1 ‐ 2^31 where a value of ‐ 1 is
used to indicate an undefined state.
winlink1000IduTdmSrvEval RW Evaluated TDM service bit mask. Setting this
parameter to value that is bigger than the
activated TDM service bit mask will execute
the evaluation process for 30 seconds. Setting
this parameter to 0 will stop the evaluation
process immediately.
winlink1000IduTdmBackupAvailabl
eLinks RO Number of TDM backup trunks.
winlink1000IduTdmBackupTable N/A IDU TDM Links Statistics table.
winlink1000IduTdmBackupEntry N/A IDU TDM Links Statistics table entry. INDEX {
winlink1000IduTdmBackupIndex }
winlink1000IduTdmBackupIndex RO Table index.
winlink1000IduTdmBackupMode RW TDM backup mode: Enable or Disable where
the main link is the air link or the external link.
Changes will be effective immediatly.
winlink1000IduTdmBackupCurrentA
ctiveLink RO TDM backup current active link: N/A air link is
active or external link is active.
winlink1000IduTdmJitterBufferSize RW TDM Jitter Buffer Size. The value must be
between the minimum and the maximum TDM
Jitter Buffer Size. The units are 0.1 x
millisecond.
Table C ‐ 3: Private MIB Parameters ‐ HSU (Sheet 24 of 33)
Name OID Type
A
cce
ss
Description