Radwin 5000 HPMP, User Manual

Page: 28 / 518

RADWIN 5000 HPMP User Manual Release 3.5.70 2 ‐ 4
Accessories
Both the HBS and the HSUs communicate respectively, with the service provider and users
through PoE devices. The communication protocol for both the service provider and the users
is Ethernet.
Extended radial coverage can be achieved by setting up adjacent sectors using collocated
HBSs.
Accessories
To build a RADWIN 5000 sector you will require some of the following accessories:
• PoE devices ‐ Both Gigabit and 100 Mbps
• HSS unit ‐ Collocation unit for intra ‐ site serial synchronization
• IDU ‐ H Aggregation unit for a collocated hub site instead of multiple PoE devices (no HSS
unit required)
• GSU for inter ‐ site synchronization
• Additional HSU types including AC powered units
• Antennas ‐ A wide variety of directional and sector antennas is available
• ODU and antenna mounting kits
• Lightning protector for use with all RADWIN outdoor products
• Ethernet repeater ‐ enables you to extend non ‐ GbE PoE ‐ ODU cables beyond the 100m
limit
• CAT 5e cables of various lengths specifically for use with RADWIN radios and PoE
devices
• Grounding cables
Sector Management Tools
RADWIN Manager
The RADWIN Manager is an SNMP ‐ based management application which manages a
complete sector over a single IP address. It can also manage HSUs separately.
The intuitive, easy ‐ to ‐ use RADWIN Manager has a rich graphical user interface.
RADWIN Web Interface for Management
The Web Interface enables you to carry out basic sector management functions using a Web
browser. It is an easy way to rapidly configure and setup a link.
It may be used to ‐
• Establish a sector on a minimal basis
• Check link parameters and make basic changes
Note
HBSs may be connected through IDU ‐ H aggregation units.