Radwin 5000 HPMP, User Manual

Page: 475 / 518

RADWIN 5000 HPMP User Manual Release 3.5.70 C ‐ 56
Private MIB Parameters
winlink1000OduPerfMonEthDayEth
CapacityThreshUnder RO The number of times throughput was below
threshold each day. Relevant for point to point
systems.
winlink1000OduPerfMonEthDayHig
hTrafficThreshExceed RO The number of times actual traffic was above
threshold each day.
winlink1000OduPerfMonEthDayAct
iveSeconds RO The number of seconds in which RPL Ethernet
service was not blocked each day.
winlink1000OduPerfMonTdmCurrTa
ble N/A This table defines/keeps the TDM counters of
the current 15 min interval.
winlink1000OduPerfMonTdmCurrE
ntry N/A This is an entry in the Current Interval Table.
INDEX {ifIndex }
winlink1000OduPerfMonTdmCurrA
ctiveSeconds 1.3.6.1.4.1.4458.1000.1.6.1
0.1.1 Gauge RO Parameter indicating whether the TDM service
was active. Under TDM backup link the
parameter indicates whether the backup link
was active.
winlink1000OduPerfMonTdmInterv
alTable N/A This table defines/keeps the TDM counters of
the last day (in resolution of 15 min intervals).
winlink1000OduPerfMonTdmInterv
alEntry N/A This is an entry in the Interval Table. INDEX
{ifIndex
winlink1000OduPerfMonTdmIntervalIdx }
winlink1000OduPerfMonTdmInterv
alIdx RO This table is indexed per interval number. Each
interval is of 15 minutes and the oldest is 96.
winlink1000OduPerfMonTdmInterv
alActiveSeconds RO Parameter indicating whether the TDM service
was active. Under TDM backup link the
parameter indicates whether the backup link
was active.
winlink1000OduPerfMonTdmDayTa
ble N/A This table defines/keeps the TDM counters of
the last month (in resolution of days).
winlink1000OduPerfMonTdmDayEn
try N/A This is an entry in the Days Table. INDEX
{ifIndex winlink1000OduPerfMonTdmDayIdx }
winlink1000OduPerfMonTdmDayId
x RO This table is indexed per Day number. Each
interval is of 15 minutes and the oldest is 96.
winlink1000OduPerfMonTdmDayAc
tiveSeconds RO Parameter indicating whether the TDM service
was active. Under TDM backup link the
parameter indicates whether the backup link
was active.
winlink1000OduPerfMonTxThresh1 1.3.6.1.4.1.4458.1000.1.6.2
0
Integer RW When the Transmit power exceeds this
threshold a performance monitoring TSL1
counter is incremented.
winlink1000OduPerfMonRxThresh1 1.3.6.1.4.1.4458.1000.1.6.2
1
Integer RW When the RX power exceeds this threshold a
performance monitoring RSL1 counter is
incremented.
winlink1000OduPerfMonRxThresh2 1.3.6.1.4.1.4458.1000.1.6.2
2
Integer RW When the RX power exceeds this threshold a
performance monitoring RSL2 counter is
incremented.
winlink1000OduPerfMonBBERThres
h1 1.3.6.1.4.1.4458.1000.1.6.2
3 Integer RW When the BBER exceeds this threshold a
performance monitoring BBER counter is
incremented. The units are 1/10 of a percent.
winlink1000OduPerfMonEthCapacit
yThreshKbps 1.3.6.1.4.1.4458.1000.1.6.2
4 Integer RW When the current throughput is below this
threshold the corresponding counter is
incremented
winlink1000OduPerfMonHighTraffic
ThreshKbps 1.3.6.1.4.1.4458.1000.1.6.2
5 Integer RW When the current traffic is above this threshold
then corresponding counter is incremented.
winlink1000OduAgnGenAddTrapExt 1.3.6.1.4.1.4458.1000.1.7.1.
1
Integer RW If 'yes' is chosen the ifIndex Unit Severity
Time_T and Alarm Id from the
winlink1000OduAgnCurrAlarmTable will be
bind to the end of each private trap.
Table C ‐ 3: Private MIB Parameters ‐ HSU (Sheet 18 of 33)
Name OID Type
A
cce
ss
Description