Radwin 5000 HPMP, User Manual

Page: 430 / 518

RADWIN 5000 HPMP User Manual Release 3.5.70 C ‐ 11
Private MIB Parameters
winlink1000OduAirRxPower 1.3.6.1.4.1.4458.1000.1.5.9.
1 Integer RO Received Signal Strength in dBm. Relevant only
for point to point systems.
winlink1000OduAirTotalFrames 1.3.6.1.4.1.4458.1000.1.5.9.
2 Counter RO Total number of radio frames.
winlink1000OduAirBadFrames 1.3.6.1.4.1.4458.1000.1.5.9.
3 Counter RO Total number of received radio frames with CRC
error. The value is relevant only for point to
point systems .
winlink1000OduAirCurrentRate 1.3.6.1.4.1.4458.1000.1.5.9.
4 Integer RO Deprecated parameter. Actual rate of the air
interface in Mbps. For Channel Bandwidth of
20 10 5 MHz divide the value by 1 2 4
respectively.
winlink1000OduAirCurrentRateIdx 1.3.6.1.4.1.4458.1000.1.5.9.
5 Integer RO Index of current air rate.
winlink1000OduAirChainsRxPower RO Received Signal Strength of Cpe chains in dBm.
Chain 1 RSS: (1 Byte) Chain 2 RSS: (1 Byte)
Chain 3 RSS: (1 Byte)
winlink1000OduAirTxPower36 1.3.6.1.4.1.4458.1000.1.5.1
0 Integer RW Deprecated parameter. Actual behavior is read ‐
only.
winlink1000OduAirTxPower48 1.3.6.1.4.1.4458.1000.1.5.1
1 Integer RW Deprecated parameter. Actual behavior is read ‐
only.
winlink1000OduAirCurrentTxPower 1.3.6.1.4.1.4458.1000.1.5.1
2
Integer RO Current Transmit Power in dBm. This is a
nominal value while the actual transmit power
includes additional attenuation.
winlink1000OduAirMinFrequency 1.3.6.1.4.1.4458.1000.1.5.1
3 Integer RO Minimum center frequency in MHz.
winlink1000OduAirMaxFrequency 1.3.6.1.4.1.4458.1000.1.5.1
4 Integer RO Maximum center frequency in MHz.
winlink1000OduAirFreqResolution 1.3.6.1.4.1.4458.1000.1.5.1
5 Integer RO Center Frequency resolution. Measured in
MHz if value < 100 otherwise in KHz.
winlink1000OduAirCurrentFreq 1.3.6.1.4.1.4458.1000.1.5.1
6 Integer RO Current Center Frequency. Measured in MHz if
center frequency resolution value < 100
otherwise in KHz.
winlink1000OduAirNumberOfChan
nels 1.3.6.1.4.1.4458.1000.1.5.1
7 Integer RO Number of channels that can be used.
winlink1000OduAirChannelsTable N/A Table of channels used by automatic channels
selection (ACS).
winlink1000OduAirChannelsEntry N/A ACS channels table entry. INDEX {
winlink1000OduAirChannelsIndex }
winlink1000OduAirChannelsIndex RO Channel Index.
winlink1000OduAirChannelsFreque
ncy RO Channel frequency in MHz.
winlink1000OduAirChannelsOperSt
ate RW Channel state. Can be set by the user.
Automatic Channel Selection uses channels that
are AirChannelsOperState enabled and
AirChannelsAvail enabled. A change is
effective after link re ‐ synchronization. Valid
values: disabled (0) enabled (1). Rewriteable
only in Point ‐ To ‐ Point products.
winlink1000OduAirChannelsAvail RO Channel state. Product specific and cannot be
changed by the user. Automatic Channel
Selection uses channels that are
AirChannelsOperState enabled and
AirChannelsAvail enabled. Valid values:
disabled (0) enabled (1).
winlink1000OduAirChannelsDefault
Freq RO Default channel's availability for all CBWs. The
valid values are: forbidden (0) available (1).
Table C ‐ 2: Private MIB Parameters ‐ HBS (Sheet 6 of 33)
Name OID Type
A
cce
ss
Description