Radwin 5000 HPMP, User Manual

Page: 213 / 518

RADWIN 5000 HPMP User Manual Release 3.5.70 8 ‐ 58
Telnet Access to the HBS
Table 8 ‐ 5: HBS Telnet ‐ Set Immediate Commands
Command Explanation
set ip <ipaddr> <subnetMask>
<gateway>
Set the ODU IP address, subnet mask and gateway.
The user must reset the ODU after the command
completion
set trap <index:1 ‐ 10> <ipaddr>
<port:0 ‐ 65535>
Set a specific trap from the traps table (e.g. set trap 3
192.168..101 162)
set readpw <oldpasswd> <passwd> Set the read access password (Read Community)
set writepw <oldpasswd> <passwd>
Set the read ‐ write access password (Read ‐ Write
Community)
set trappw <oldpasswd> <passwd> Set the trap Community string
set tpc<power:Value between
minimal Tx power, and maximal Tx
power>
Set the ODU Tx Power. If a wrong value is entered,
both min and max values shall be displayed in the
error reply
set name <new name> Set the name of the link
set location <new location> Set the name of the location
set contact <new contact> Set the name of the site manager
set ethernet <port:LAN1>
<mode:AUTO,10H,10F,100H,100F,D
ISABLE> Set the mode and speed of the Ethernet port
reboot
Resets the ODU. The user is warned that the
command will reset the ODU. A new Telnet session to
the ODU may be opened after the reset is complete.
help Displays the available commands
Table 8 ‐ 6: HBS Telnet ‐ Set Commands requiring Reset
Command Explanation
set secId <SectorID> Set new sector ID ‐ Reset required.