Radwin 5000 HPMP, User Manual, Page: 144 / 518

RADWIN 5000 HPMP User Manual Release 3.5.70 6 ‐ 32
Registering a nomadic HSU for service
Observe that the registered HSU icon LED is now green and that the time slots bar on
the left reflects the proportion of uplink and downlink time slots allocated.
9. Repeat steps 1 to 8 for other fixed HSUs.
Registering a nomadic HSU for service
Although we only have one nomadic HSU in our demonstration sector, in practice we would
make provision for a larger number to enable movement between sectors. By way of
example, we will pre ‐ register four HSU slots to levels A, B and C and time slots to each level as
shown:

To configure nomadic HSUs from the HBS:
1. Open the HBS Configuration window and then its Nomadic Tab:
Figure 6 ‐ 9: HBS Nomadic Configuration